Brake Identification Help

[WI-Barracuda]

Can anyone tell me what these came off of? We thought when we initially got all the parts that the previous owner was going to use these to convert the 1965 Barracuda to front discs, but after looking at them again, they look way to big. Seems to be stamped with "A 71312", but didn't see much of anything on the forum or the web about them. Any help would be greatly appreciated.

 

[gdrill]

Those appear to be Kelsey Hayes dual piston. I do not know the differences in early vs later, but they were used up until 1971 for sure.

@hemi71x

 

[hemi71x]

65-72 A body, Kelsey Hayes, 4 piston caliper, disc brake system.
Appears to be in great shape.
You keeping them, or selling them?
They are in demand, and you could get a decent price for them, the condition they are.

Got the hubs and rotors, too?
The hubs would be the holy grail to the system, if you have them.

 

[WI-Barracuda]

Would these fit on my '65 Barracuda?

 

[chryslerfat]

Would these fit on my '65 Barracuda?

Yes

 

[WI-Barracuda]

Would using these be my best solution or should I sell them and go with aftermarket? Not sure what the value would be on these.

 

[chryslerfat]

Would using these be my best solution or should I sell them and go with aftermarket? Not sure what the value would be on these.

As long as you have the hubs for them I would run them. I have a couple sets saved to put on my cars.

 

[AJ/FormS]

They are awesome on my streeter,with 10" rear drums.a 68 Barracuda*3650*

 

[WI-Barracuda]

Will they fit behind a set of 14" rallye wheels?

 

[AJ/FormS]

Hyup
in fact,whatever wheels you use, have to be sorta shaped like the Rallys, on account of the caliper hangs off the outboard side too far for any flat spider.