NMmoparman
Member
anyone know why I would have no power to my brake light switch turn signals working good but no brakelights
Hemi powered 1928 Farmalls do not have brake lights, and neither do 1943 Supermarine Spitfiresanyone know why I would have no power to my brake light switch turn signals working good but no brakelights
Mike- you just solved my problem! Several years ago the dome light on my '71 Newport quit working. I never drive it at night so I just never got around to replacing the bulb. I forgot about it. Several months ago I noticed my brake lights quit working. So, I replaced the stoplight switch- very long and unpleasant job. Still not working. It was demoralizing and I was dreading doing a troubleshoot. Then I saw this post of yours and thought "hmmmmm- never did check the fuse". In my 40 years of tinkering with Mopars I've never had a fuse burn out. So.....I checked the service manual and, unbelievably- the dome light and brake lights are on the same fuse! Popped that sucker out and sure enough- it was blown. Two problems solved in 30 seconds. Thanks man.As said above, check brake light switch. Brake lights are on a different fuse than turn signals, as I recall, so check your fuses.
The brake lights go through the turn signal switch, so step on the brakes and have an observer watch the lights while you wiggle the t/s switch. If they come on you have a bad t/s switch. If you have to replace it, buy the whole switch, not the cam. Cam is only good for broken off return tabs in my opinion.