brass micro-rivets for Gauge faces?

[Miranthis]

I am doing the voltage limiter conversion on my 1966 Barracuda gauges. In order to do it I need to move the face on my gas gauge. so, reattaching the face I will need some of the little brass rivets you see here (one removed, one loosened to allow the gauge to pivot). I find some GM gauge face rivets on the corvette sites, but what are these called in MOPAR land and where can I find them? Ideas? Do i need to make my own using brass rod stock?

TIA...

 

[TheGrateRonzini]

I found these on Etsy 1/16 doing a search for blind brass rivets

 

[Miranthis]

Yeah, i saw those types. I suppose i can center drill them to do thr roll over on the backside. I also saw these, which might work but are not solid..
30 Pcs 1.5mm 2mm 2.5mm (inner Diameter) Small Tiny Eyelets, 4 Colors, for BJD Doll Clothes and Shoes Making Mini Craft Supply - Etsy

 

[Musclesigns]

Checkout Hanson Rivets

Rivets, Riveting Tools and Equipment | Hanson Rivet & Supply Co

 

[cudamark]

That's why I just drilled a hole in the side of the gauge housing instead of removing the faceplate. Just takes a small piece of tape to cover the hole.

 

[Miranthis]

That's why I just drilled a hole in the side of the gauge housing instead of removing the faceplate. Just takes a small piece of tape to cover the hole.

Folks are re-silkscreening the gauge faces, so some rivet should be out there for it.

 

[jeff alder]

Folks are re-silkscreening the gauge faces, so some rivet should be out there for it.

I have never bought these. Might be worth a look.
BRASS TUBULAR RIVIT X3 FOR SPEEEDOMETER/TACH FACES – Felon Performance

 

[TheGrateRonzini]

I found these on Etsy 1/16 doing a search for blind brass rivetsView attachment 1716440160

These you need the blind rivet tool

 

[dadsbee]

More than one way to skin a cat... appolgies to the cat owners...

1969 Dodge Super Bee Coupe Restoration