Centerlink ???

[gm1236]

I was looking at a Duster drag car the other day and it had what appears to be a factory Mopar centerlink that has s bends inside of the Pitman arm and idler arm holes that moved the center of the link forward about 3-4”. It used the pre 73 type where the link sits on top of the idler and pitman arms. Any idea what vehicle this was used on? I don’t have any pictures.

 

[Jim Lusk]

Without pictures I have no idea what you're talking about.

 

[gm1236]

I couldn’t get a good picture of it. Here’s a crappy drawing of what it looked like. The tie rods attached at and angle like the regular a body centerlink. Could it be from a van or a c body?

 

[SGBARRACUDA]

That is someone’s custom built center link I suspect. Van or C body would be to long.

 

[kursplat]

might be a C-body one bent to hell, probably to clear an oil pan

 

[gm1236]

might be a C-body one bent to hell, probably to clear an oil pan

That is exactly what it does, if they did bend it, it’s nearly perfect. I would think they are hard to bend. With heat you can bend anything.

 

[RustyRatRod]

That is exactly what it does, if they did bend it, it’s nearly perfect. I would think they are hard to bend. With heat you can bend anything.

Get a picture. I'd really like to see it.