[Found!] Cheaper Mopar Big block 1965+ 10.5" bellhousing stock or aftermarket

[Two Time Signet]

Building an engine test stand and need a 1965 and newer big block 10.5" 130 tooth aluminum or steel bellhousing. The bellhousing can have minor damage, damaged threads, and rust but I need to be able to safely attach it to a big block 440 engine with starter and use the transmission mounting holes for my engine stand frame. I have a new 10.5" flywheel and don't need pivot fork or other hardware.

New bare Lakewood bellhousing is $460 shipped so my price point is lower than this. Looking for someone that has a crusty old one they want to get rid of, not wanting a rare item. Can get those online retailers and eBay.

I'll send a prepaid UPS shipping label, will need the total shipped weight and box dimensions.

 

[HemiSSDart]

Last one I used was from a big block with a 3-speed trans, they are not desirable and cost much less than a 4-speed bellhousing and work just fine. I only have one for a small block right now...

 

[1500swinger]

I'm not saying that they didn't, just never seen a bb 3spd.

 

[HemiSSDart]

I'm not saying that they didn't, just never seen a bb 3spd.

It was in a 69 Polara 500 convertible, 3-speed on the tree. Last year for a stick in a C-Body...

 

[Two Time Signet]

Found one for $50 TY