Chin spoiler?!

[vntned]

I've been thinking about adding a deep front chin spoiler on my '64 Dart. I'm looking to reduce drag and increase attitude. Anybody have any ideas on what could be made to fit easily? Maybe a factory chin spoiler off of another vintage car. '69 Z28 repops are cheap and readily available.

 

[KitCarlson]

In the mid 80's I made a front spoiler from 4" belting I purchased at a farm store. It was cloth reinforced rubber about 3/16" thick. I made brackets to hold and shape as desired. It is tough to cut, and very durable . I used it on a Diplomat police car, to divert air to radiator.

 

[Serj22]

In the mid 80's I made a front spoiler from 4" belting I purchased at a farm store. It was cloth reinforced rubber about 3/16" thick. I made brackets to hold and shape as desired. It is tough to cut, and very durable . I used it on a Diplomat police car, to divert air to radiator.

This is still done, but with garage door moulding, and mostly on Hondas, In-fact some people have re-packaged the moulding and sold it as a universal car lip.

I've seen a few Chevy S-10 spoilers added to later A-bodys on the cheap, and it looks pretty good.

 

[72bluNblu]

67/68 Camaro is probably the easiest. You can get a plastic version from OER for $35, so if it doesn't work you're not out much money. I put one on my Duster, once you get past the "camaro" part it looks pretty good. They're pretty generic, and can be modified pretty easily. If you want to get really crazy you can reshape them a bit with a heat gun too.

http://www.summitracing.com/parts/oer-3916673/overview/make/chevrolet/model/camaro

 

[SRT_DSTRHOLC]

I have the wider version that they no longer make. Looking to get 150

 

[64DartGTinAZ]

I bought a '69 Camaro chin spoiler off of eBay for about $45 - haven't mounted it yet, but it looks like it's not too hard to adapt

I snagged the photos posted below off of some thread (or maybe another forum?) where a guy used a 1969 Camaro part - does anyone recognize the car? Would like to attribute it - I saved the pics as reference for when I get around to doing this.

prrc made one out of a 2010 Challenger part:

http://www.forabodiesonly.com/mopar/showthread.php?t=256796&highlight=spoiler

this one is kinda cool:

http://www.forabodiesonly.com/mopar/showthread.php?t=132248&highlight=spoiler