[FOR SALE] Cleaning out shop and selling off early A and misc. parts

Mopar Mechanical Parts For Sale

Thread Status:
Not open for further replies.
  1. 1GTMOPAR

    1GTMOPAR 65 DART GT CONV

    Messages:
    64
    Likes Received:
    18
    Joined:
    Dec 6, 2010
    Location:
    FAIRFIELD CA.
    Local Time:
    10:03 PM
    Contact Seller
    Clutch fan with aluminium bladed fan. Like new 100.00 plus the ride
    Early A stock exhaust manifolds with downpipes for true dual exhaust 150.00 plus the ride
    New Mopar flex plate never used 60.00 plus the ride
    Floor shifter with linkage. Missing knob with button but fully functional 50.00 plus ride
    Mechanical fuel pump SBM used once for about 50 miles before swapped for electric pump. 20.00 plus the ride
    65 Dart horns. 10.00 each plus the ride
    Early A factory jack with foot plate 40.00 plus ride, additional plate 5.00 plus ride, hols down 5.00 plus ride, Jack mechanism without post 10.00
    Harmonic balancer off of my 340 with center bolt. will work on 318 as well. Rubber in excellent condition. 20.00 plus ride
    O.E 4 speed clutch fork boot. Not ripped in excellent condition 10.00 plus ride
    Small block oil pump drive. In good condition can be used in engine or modified for pre oiler 15.00 plus ride
    O.E styl ignition coil Part# 29910. used once in great working order, tiny dent in bottom but in excellent shape 20.00 plus ride
    Factory Hurst 4 speed shifter from my 65 Dart Gt. Hurst competition plus in great working order 120.00 plus ride
    Early A pittman arm 10.00 plusride
    8.75 pinion snubber O.E 15.00 plus ride
    Tranny Dipstick tube from early A 904 10.00 plus ride
    8.75 rear Axle retainer plates 10.00 plus ride
    Small Block fully self contained distributor. Used once then switched to MSD. worked great no need for external ECU quick hookup 30.00 plus ride
    O.E electronic distributor works great no slop in bearing 15.00
    New 10" rear drums big bolt pattern. Bought these several years back before going to disc. Minor surface rust, brake surface not pitted just surface rust 40.00 for the pair plus freight
    Edelbrock 318/360 Performer aluminium intake manifold. Was on a little 318 I had and worked excellent. Much like the LD4B manifold. 100.00 plus the ride. will pair up with rebuilt edelbrock 600 carb for package deal at 180.00 plus the ride
    Factory Cast Iron Commando 4 barrel intake manifold. 2465726 Never molested or drilled to fit non 273 engines. could use a quick blast and paint and would be real nice. 100 plus the ride.
    I also have fender trim for 65 Dart Gt convertible for top of doors,fenders and rear quarters. if interested PM me for details. I have some other 65 Dart headlight buckets etc that I may be willing to part with. Some prices negotiable
     

    Attached Files:

  2. 1GTMOPAR

    1GTMOPAR 65 DART GT CONV

    Messages:
    64
    Likes Received:
    18
    Joined:
    Dec 6, 2010
    Location:
    FAIRFIELD CA.
    Local Time:
    10:03 PM
    more pictures
     

    Attached Files:

  3. 1GTMOPAR

    1GTMOPAR 65 DART GT CONV

    Messages:
    64
    Likes Received:
    18
    Joined:
    Dec 6, 2010
    Location:
    FAIRFIELD CA.
    Local Time:
    10:03 PM
    Additional Photos of parts
     

    Attached Files:

  4. 1GTMOPAR

    1GTMOPAR 65 DART GT CONV

    Messages:
    64
    Likes Received:
    18
    Joined:
    Dec 6, 2010
    Location:
    FAIRFIELD CA.
    Local Time:
    10:03 PM
    And some more pictures of parts
     

    Attached Files:

  5. Treblig

    Treblig Well-Known Member

    Messages:
    5,788
    Likes Received:
    2986
    Joined:
    Oct 5, 2013
    Location:
    South Texas
    Local Time:
    12:03 AM
    PM sent.

    Treblig
     
  6. 72demon440

    72demon440 Well-Known Member

    Messages:
    497
    Likes Received:
    7
    Joined:
    Sep 23, 2006
    Location:
    Wisconsin
    Local Time:
    12:03 AM
    PM Sent!

    Jared
     
  7. My70b

    My70b Well-Known Member

    Messages:
    77
    Likes Received:
    46
    Joined:
    Mar 21, 2010
    Location:
    Bethlehem Pa
    Local Time:
    1:03 AM
    Pm sent Gene
     
  8. pishta

    pishta I know I'm right....

    Messages:
    16,190
    Likes Received:
    5915
    Joined:
    Oct 13, 2004
    Location:
    Tustin, CA
    Local Time:
    10:03 PM
    ill take distributor if not spoken for
    PM'd
     
  9. 440BelII

    440BelII Well-Known Member

    Messages:
    1,013
    Likes Received:
    38
    Joined:
    Apr 26, 2008
    Location:
    Darien Center, New York
    Local Time:
    12:03 AM
    pm's sent on dizzys. Pishta, you can have first dibs on the dizzys if you were in front of me.
     
  10. 1GTMOPAR

    1GTMOPAR 65 DART GT CONV

    Messages:
    64
    Likes Received:
    18
    Joined:
    Dec 6, 2010
    Location:
    FAIRFIELD CA.
    Local Time:
    10:03 PM
    Pm's replied, drums are pending,floor shifter pending,distributors pending. trying to get everyone replied to. thanks guys
     
  11. gkmopar

    gkmopar FABO Gold Member FABO Gold Member

    Messages:
    564
    Likes Received:
    7
    Joined:
    May 28, 2012
    Location:
    Ohio
    Local Time:
    1:03 AM
    PM sent
     
  12. 66fs

    66fs Well-Known Member

    Messages:
    4,279
    Likes Received:
    1109
    Joined:
    Sep 9, 2009
    Location:
    Greenwood, South Carolina
    Local Time:
    1:03 AM
    I'll take the 65 Hurst 4 speed shifter if not spoken for.
     
  13. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    45,731
    Likes Received:
    29814
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    12:03 AM
    Just curious but this intake manifold is a Correct 1965 273/ 4 barrell intake. The Edelbrock carb offered is a great match for this intake.
     
  14. armyofchuckness

    armyofchuckness The Flying Valiant

    Messages:
    689
    Likes Received:
    107
    Joined:
    Aug 23, 2008
    Location:
    Gainesville, FL
    Local Time:
    1:03 AM
    Sending pm on clutch fan.
     
  15. woody30

    woody30 woody30 FABO Gold Member

    Messages:
    2,395
    Likes Received:
    20
    Joined:
    May 13, 2012
    Location:
    walton ny
    Local Time:
    1:03 AM
    PM sent
     
  16. Jkirk

    Jkirk Well-Known Member

    Messages:
    247
    Likes Received:
    18
    Joined:
    Oct 5, 2009
    Location:
    Knoxville
    Local Time:
    1:03 AM
    pm sent
     
  17. 1GTMOPAR

    1GTMOPAR 65 DART GT CONV

    Messages:
    64
    Likes Received:
    18
    Joined:
    Dec 6, 2010
    Location:
    FAIRFIELD CA.
    Local Time:
    10:03 PM
    Edelbrock intake, coil, dist drive, axle retainers, dipstick,pittman arm, exhaust manifolds, fuel pump, flex plate still available. Pm me with questions. Thanks guys
    rick
     
  18. cuda64

    cuda64 Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Feb 28, 2015
    Location:
    utah
    Local Time:
    11:03 PM
    Pm sent, about the stock 273 intake
     
  19. cuda64

    cuda64 Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Feb 28, 2015
    Location:
    utah
    Local Time:
    11:03 PM
    Is the 273 4bbl intake still available?
     
  20. moparman3211

    moparman3211 Well-Known Member

    Messages:
    110
    Likes Received:
    1
    Joined:
    Jul 18, 2010
    Location:
    columbus, ohio
    Local Time:
    1:03 AM
    do you still have the shifter & linkage let me know
     
  21. Treblig

    Treblig Well-Known Member

    Messages:
    5,788
    Likes Received:
    2986
    Joined:
    Oct 5, 2013
    Location:
    South Texas
    Local Time:
    12:03 AM
    I sent you my e-mail address a few days ago (3/2/20015) but still haven't received an invoice. Tried to send you another PM today (4th) but your mail box if full. As soon as you send me an invoice I'll pay for the floor shifter and linkage. You already sent me the total (including shipping) $63. Check your PM inbox for the 2nd of March, my PM should be there. If you can't find it, here is my e-mail:
    treblig@grandecom.net



    Thanks let me know,
    Treblig
     
  22. Vitamin c

    Vitamin c Vitamin c FABO Gold Member

    Messages:
    1,277
    Likes Received:
    37
    Joined:
    Dec 1, 2009
    Location:
    Holland, MI
    Local Time:
    1:03 AM
    pm box is full.
    Interested in axle retainer plates (do you have the lock tab?
    interested in pinion snubber
     
  23. cuda64

    cuda64 Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Feb 28, 2015
    Location:
    utah
    Local Time:
    11:03 PM
    273 intake ? Sorry to bug just already have mine off and wanna get something put back on, thanks
     
  24. Bad Sport

    Bad Sport HALF A BUBBLE OFF Staff Member FABO Gold Member

    Messages:
    37,004
    Likes Received:
    17355
    Joined:
    Jun 12, 2010
    Location:
    The Wolverine
    Local Time:
    1:03 AM
    I'll take them, PM me your info.

    Thanks
     
  25. 1GTMOPAR

    1GTMOPAR 65 DART GT CONV

    Messages:
    64
    Likes Received:
    18
    Joined:
    Dec 6, 2010
    Location:
    FAIRFIELD CA.
    Local Time:
    10:03 PM
    Some parts still left, alum intake manifold, 65 dart horns, oil pump drive, Pittman arm, mechanical fuel pump, flex plate, Jack, dipstick, coil, 65 Dart V8 exhaust manifolds with down pipes. Everything else has been sold. For those of you that didn't get a pm response from me that means that you were late in showing interest.
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.