[SOLD] Complete disc brake front suspension with K member. aftermarket disc brake setup

Mopar Mechanical Parts For Sale

Thread Status:
Not open for further replies.
  1. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    Contact Seller
    For sale is the factory k member with aftermarket summit racing disc brake setup from my 1974 dart. The new brake kit came with new spindles, large balljoints, large vented rotors, new calipers, bearings, and these are now all installed on my dart, which currently drives on the street and runs 10's in the quarter. I ordered a tubular K member as my car now runs deep into the 10's, and i no longer will need the factory setup. the k member includes the disc brake kit, which retails for $600 alone.
    (http://www.summitracing.com/parts/sum-bk1208/overview/make/dodge)


    you're getting my entire COMPLETE setup out of my running, driving, racing, stopping, car.

    i'm also throwing in the following.
    aftermarket, urethane smallblock motor mounts.
    nice, tight, manual steering box,
    the complete disc brake setup
    newer shocks
    torsion bars

    this is a bolt in and go setup!!!

    asking $900 obo

    located in mogadore ohio, but regularly in salem ohio. 44260, 44278.

    i have countless pictures and videos of this setup running and driving, or going 130mph down the dragstrip! hopefully someone can use this!

    http://www.cardomain.com/ride/3149406/1974-dodge-dart/
     
  2. joshb1983

    joshb1983 Well-Known Member

    Messages:
    52
    Likes Received:
    11
    Joined:
    Jul 29, 2012
    Location:
    kentucky
    Local Time:
    12:43 PM
    would the brake setup work on my 70 roadrunner? iv herd of ppl swaping them over from darts and scamps..if so id be interested in complete beake setup..
     
  3. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    I believe the spindle is the key to swapping brakes from one mopar to another. There are large balljoint and small balljoint front ends. as long as you have (or switch to) the larger balljoint, i believe the spindle, and this entire brake kit, will swap over. i have two people PMing me about the entire front end. If nothing happens there i'll consider you first interested in the brake setup.
     
  4. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    PM's responded to, still currently avail.
     
  5. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    i can also truck freight this through work for a pretty reasonable price if it needs shipped
     
  6. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    in fact,,,for $900...i'll ship it for free. everything from the steering box the k frame, to the shocks, torsion bars, disc setup...everything.
     
  7. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    responded to more PM's...still have it.
     
  8. Buschi340

    Buschi340 Well-Known Member

    Messages:
    1,251
    Likes Received:
    25
    Joined:
    Feb 19, 2005
    Location:
    Wilhelmshaven, GERMANY
    Local Time:
    5:43 PM
    your brake kit comes w/ spindles? And what are you asking for it? Would you ship to germany at all?
     
  9. carls72dart

    carls72dart FABO Gold Member FABO Gold Member

    Messages:
    369
    Likes Received:
    200
    Joined:
    Dec 31, 2008
    Location:
    massachusetts
    Local Time:
    12:43 PM
    How many miles would you say you have on the whole setup? Are the torsion bars stock or aftermarket? Also, what type of shocks? Thank you:)
     
  10. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    I can't ship overseas on something of this size i'm sorry. if you want to find a turnover company in that states that will then ship it to you..i'll gladly send it to them. i got ran all over the place trying to be very accommodating on a foreign shipment before and the seller backed out on me last min, after countless hours of quotes and research, sorry...
     
  11. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    There MAY be 1000 miles on the disc brake setup and the shocks. The torsion bars are stock. The summit brake kit is made by stainless steel brakes corp, the spindles are the same by SSBC. the shocks are oem replacement, red in color. the car only has 31K miles on it so the Hard parts like the K and the A arms have that many miles on them.
     
  12. Buschi340

    Buschi340 Well-Known Member

    Messages:
    1,251
    Likes Received:
    25
    Joined:
    Feb 19, 2005
    Location:
    Wilhelmshaven, GERMANY
    Local Time:
    5:43 PM
    USPS should be a prob. I would prepay via paypal. But.... what is it now exactly what you sell? It doesn't come clear to me. The Summit set is differenet from the set you have on the picture. The summit set is 4 piston? I am looking for an original 73up BBP set ( 1 piston/ floating caliper ).
     
  13. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    The brake kit is a few years old. it is a single piston caliper, similar to a factory setup. they changed the design on the summit kits since i bought this one. hope that answers your question.

    so i understand if i can't sell this unit as a whole, you'd be interested in the spindles,pads/rotors, calipers, caliper brackets?
     
  14. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    Still avail
     
  15. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    recently got several PM's how i would package for shipment. I'll have the entire thing on a pallet and rapped up with shrink wrap. thanks for the inquiry's
     
  16. carrmann

    carrmann Well-Known Member

    Messages:
    61
    Likes Received:
    8
    Joined:
    Apr 14, 2013
    Location:
    Dunedin, FL
    Local Time:
    12:43 PM
    PMed
     
  17. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    PM responded to
     
  18. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    pending offer on the K and the steering box. if we work it out, those items are going!
     
  19. Johnny Mac

    Johnny Mac www.blueprintengines.com FABO Vendor

    Messages:
    3,939
    Likes Received:
    3256
    Joined:
    Jul 10, 2010
    Location:
    OHIO
    Local Time:
    12:43 PM
    K member and steering box are SOLD!

    disc brakes still avail. i'll start another thread on those. or PM me.
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.