I have for sale a set of 16 very little used OEM replacement pushrods that came from a 1972 340 engine. This was a very poorly rebuilt engine that had some ring seal issues and we’re redoing to correct the problems. These pushrods are in excellent shape with the only issue being that on 4 of the pushrods, there are some rub marks towards one end. Whoever assembled this engine got new rocker arms and put the ones in the box marked “Right” on the right cylinder head and ones in the box marked “Left” on the left cylinder head. With that, the pushrods were too close to the hole in the head and was rubbing. They are all straight and have no other issues. I believe that these are from Elgin P/N PR-324S since the rockers and shafts were from Elgin. They are the ball/ball design and measure 5/16” diameter and 7.53” in length from tip to tip.
Amazon product ASIN B000CGQ4XO
I would like to get $25.00 for the set of 16 plus the shipping.
Ken
Edison, NJ
Amazon product ASIN B000CGQ4XO
I would like to get $25.00 for the set of 16 plus the shipping.
Ken
Edison, NJ
