Tsully
Well-Known Member
Contact seller
Crane Cams 64770 Ductile Iron Rocker and Shafts.
Rockers were on the car when I bought them, took them off as the previous owner had the wrong push rods for the cam and lifters. PR’s are measuring 8.28 not sure if that is totally accurate as I did use a Harbor Freight Micrometer. The hold downs are MP with ARP bolts, they were sanded on when I got the car, I think to make room for the Mr Gasket Chrome Valve Covers that tapered on the ends.
$400 Shipped to the lower 48.
Located in St George SC, 29477
Rockers were on the car when I bought them, took them off as the previous owner had the wrong push rods for the cam and lifters. PR’s are measuring 8.28 not sure if that is totally accurate as I did use a Harbor Freight Micrometer. The hold downs are MP with ARP bolts, they were sanded on when I got the car, I think to make room for the Mr Gasket Chrome Valve Covers that tapered on the ends.
$400 Shipped to the lower 48.
Located in St George SC, 29477
Last edited by a moderator: