D150 with a RV 440, just to see what it will run

[RustyRatRod]

never say never, becuz you never know!

Yet here you are sittin on a forum. Get to work, slacker!

 

[318willrun]

Yet here you are sittin on a forum. Get to work, slacker!

When I'm here, I'm nowhere near that 440 or truck, couldn't touch it if I wanted (and I want to !!)

 

[RustyRatRod]

When I'm here, I'm nowhere near that 440 or truck, couldn't touch it if I wanted (and I want to !!)

don't not don't not. or you wouldn't be here. LOL

 

[lv6spd]

I really enjoy the channel and I’m ready for that update video. I’m going to say 14.76

 

[318willrun]

I really enjoy the channel and I’m ready for that update video. I’m going to say 14.76

Thanks! And we got you down!

Princess Valiant --- 18.20
Ant ------------------ 17.29
MOPARMAGA --—- 16.99
TT5.9mag --------- 16.90
jas0162 ----------- 16.20
Elmo.65 ————— 15.99
ValiantRacing ----- 15.85
413 ---------------- 15.50
plymouth67 ——— 15.42
1973dust ———— 15.40
Owen 340+6 ------ 15.38
cop car wagon ---- 15.30
DFX 340 Duster — 15.25
Professor Fate ---- 15.20
dirty white boy-----15.15
71GSSDemon ----- 15.00
DartManPlum ——- 14.99
Pyrogen007 ———- 14.95
jrc4y4 --------------- 14.90
Spadman ————- 14.89
Sharpone ---------- 14.85
Kendog 170 ——— 14.82
Killer6---------------14.81
69conv--------------14.80
496 polara --------- 14.78
Iv6spd —————— 14.76
Turbo440Dart ----- 14.70
70SwingerGuy------14.65
Mopar44134--------14.605
mopowers---------- 14.53
Curious Duster ---- 14.50
volaredon ---------- 14.45
red67gts ----------- 14.40
Super-Cuda -------- 14.36
a-bodyguy --------- 14.319
memike —————- 14.27
abcdefghii --------- 14.24
67/6barracuda ---- 14.20
skep419 ----------- 14.12
Beams -------------- 14.05
junkyardhero ------ 14.00
halfafish ------------ 13.99
mgoblue9798 ------ 13.91
440 Mike ----------- 13.90
fishmen67 --------- 13.80
Gomer Pyle ———— 13.76
sr71mopar---------- 13.75
273 ------------—-- 13.70
Garrett Ellison------13.58
331MP ------------- 13.40
Illahe——————— 13.30
RustyRatRod ----—- 13.016

 

[318willrun]

Not much, but it’s a start! Today I went down and drained the oil out of the 440, rotated it over on the engine stand, and removed the oil pan and pick up tube.

Today I went down and scraped off all the old gasket. And, I put the RV oil pan and pick up tube back on. I used the windage tray/gasket (all in one) that @fishmens67 recommended. Worked real slick, now I hope it don’t leak. I didn’t use any sealant on it as it doesn’t require it. If I reuse it cause it’s supposed to be reusable, I will put seal around it then.

 

[318willrun]

Today I went down and scraped off all the old gasket. And, I put the RV oil pan and pick up tube back on. I used the windage tray/gasket (all in one) that @fishmens67 recommended. Worked real slick, now I hope it don’t leak. I didn’t use any sealant on it as it doesn’t require it. If I reuse it cause it’s supposed to be reusable, I will put seal around it then.

wait. I gotta get my head in the game. The RV oil pan (which I assumed would be like a Dodge van) is a front sump pan. The truck will need a rear sump pan. Looks like I'll need a pan/pickup. this RV must have been like a Winnebago or something.

 

[Two Time Signet]

Not a budget item but I like Kevko pans if going higher than stock capacity and oil control. Oil Pans - Mopar - Big Block

Got this one for my car.

 

[Elmo.65]

I’ve been out for a while. Life goes on. I was just checking in to see what’s going on. Is it getting better or worse or what? I’ll go back and try to read all this if I get a little time.

 

[318willrun]

Not a budget item but I like Kevko pans if going higher than stock capacity and oil control. Oil Pans - Mopar - Big Block

Got this one for my car.
View attachment 1716527925

yeah, i like those pans. bought one for my 360. I'll probably just order the pan, pickup tube, and dip stick from 440 source and move on.

 

[318willrun]

I’ve been out for a while. Life goes on. I was just checking in to see what’s going on. Is it getting better or worse or what? I’ll go back and try to read all this if I get a little time.

we just rode out the winter. Starting to move on things a little now, then realized my pan I thought was right is actually wrong.. lol. We'll make an order and fix that real quick like.

 

[Elmo.65]

Thanks for the update

 

[TT5.9mag]

yeah, i like those pans. bought one for my 360. I'll probably just order the pan, pickup tube, and dip stick from 440 source and move on.

It’s a Moho 440 and it’s only gonna spin 4500 rpm, zip tie a coffee can under it and fire it up!!

 

[318willrun]

It’s a Moho 440 and it’s only gonna spin 4500 rpm, zip tie a coffee can under it and fire it up!!

Do mopars even need oil for such a short amount of time???

 

[Two Time Signet]

Do mopars even need oil for such a short amount of time???

Free used fryer oil from the local DQ, just strain it through some nylons.

 

[318willrun]

Placed an order with 440source... got it all on the way

 

[Turbo440Dart]

It’s been a day. Is it together yet?

 

[318willrun]

It’s been a day. Is it together yet?

Is my stuff shipped from Nevada yet??? LOL

 

[Turbo440Dart]

Is my stuff shipped from Nevada yet??? LOL

You didn’t pay to over night it? Jeeeeez man.

I will say I gambled with a source pan and pickup on the most recent motor. Besides some slight “massaging” of the pickup it fit really well and doesn’t leak. Can’t say the same for my milodon pan.

 

[318willrun]

It’s not much, but it’s a start!

 

[RustyRatRod]

Holy crap. You gotta talk us half to death. You'll never get this done. lol

 

[Mopar Sam]

It’s not much, but it’s a start!

Cool!

 

[Two Time Signet]

Appreciate your videos, keep em coming! Long ones good too, talking is what I watch those videos for. Always can learn something new from others.

 

[318willrun]

Does this count for much?? LOL. It’s on the concrete and on the ramps…

 

[cop car wagon]

Looks like you're on the countdown to your 15.30et.
Come on man!