Daniel Stern lighting relays - sweet!

[Mopar to ya]

I wish I took photos, but I wanted to drive the car tonight so I was in a hurry to install the kit. I ordered a headlamp relay wiring harness from Daniel Stern. I was having a problem with my lights turning on and off when I drove home at 3am and they always got brighter on higher revs and dimmer on lower rpm. I installed it in 15 minutes. Power now comes from the battery and the only thing the switch does is energize the relay. I just took it for a drive on my break and the lights are way brighter, and all the time. Revving the engine changes nothing anymore. I have Hella Vision Plus conversions and they are freakin' awesome. I'll have to wait for the drive home to be sure the on/off problem is fixed, but I already know it is. This is an awesome kit and I recommend it highly.

 

[res1vw21]

yep Dan knows his stuff

 

[Mopar to ya]

He was very helpful and suggestive. My drive home last night was perfect! The headlight problem of going on and off is fixed.

 

[RustyRatRod]

I put his Cibie conversion on my 2008 Wrangler and it was like night and day. Pun intended.

 

[65 Dartman]

I've also got his relay conversion kit for my wagon - since the car is off the road, it's not yet install. Great custom er service.

 

[340-4spd]

I've used his wiring diagram to install headlight relays on three vehicles. Mopar was doing some great things back in the day, but electrics was not one of them.

 

[Mopar to ya]

I've used his wiring diagram to install headlight relays on three vehicles. Mopar was doing some great things back in the day, but electrics was not one of them.

I agree but I can do you one better. My other project is a 74 Triumph Spitfire with Lucas Girling electronics. They don't call Lucas the Prince of Darkness for nothing!

 

[Mopar to ya]

I've also got his relay conversion kit for my wagon - since the car is off the road, it's not yet install. Great custom er service.

I bought the whole harness, because right now I have more money than time. I installed it literally in less than 15 minutes, closer to ten. If I didn't have a broken tab on my grill it would have been faster!