Daytona Iroc series race car specs

Mopar General Discussions

  1. moparclown

    moparclown Well-Known Member

    Messages:
    1,708
    Likes Received:
    11
    Joined:
    Aug 19, 2008
    Local Time:
    5:33 PM
    I am hoping somebody might be able to provide some info for me on the engines that were used in the Daytona Iroc race cars?I am really interested in what was used in the lower end those engines?
    Thanks for any and all help on this.
    Doug
     
  2. yellowdartdave

    yellowdartdave RIP 1-5-12 Legendary Member

    Messages:
    3,042
    Likes Received:
    11
    Joined:
    Mar 8, 2008
    Location:
    Jax, Fl.
    Local Time:
    5:33 PM
    They were built from 90 thru 95, using the Busch Grand National chassis.

    -Full tube chassis built by Banjo Matthews
    -Diversified Glass Products bodywork
    -355 c.i.d. Dodge V-8 with 450 horsepower, dry sump, Brodix aluminium heads, MSD ignition, Holley carb, Jesel valvetrain and much more!
    -Borg Warner T-10 four speed transmission
    -Stock Car Products quick-change rear
    -Penske adjustable shocks
    -Coleman brake calipers
    -33 gallon Goodyear fuel cell with trunk fill
    -Autometer gauges
    -Driver and passenger seats fitted with Schroth 5-point harnesses
     
  3. 70aarcuda

    70aarcuda Master Hoader of SBM FABO Gold Member

    Messages:
    15,809
    Likes Received:
    4366
    Joined:
    Jan 16, 2005
    Location:
    las vegas
    Local Time:
    3:33 PM
    and solid roller cam from cam motion....
     
  4. Abodybomber

    Abodybomber Breaking street machines , since 1983.....:) Legendary Member

    Messages:
    31,576
    Likes Received:
    10469
    Joined:
    May 21, 2011
    Location:
    Arroyo grande ca
    Local Time:
    3:33 PM
    That was good racing,I miss IROC.
     
  5. Bulldozer

    Bulldozer free ice cream sandwiches

    Messages:
    15,526
    Likes Received:
    2349
    Joined:
    Oct 16, 2011
    Location:
    behind the wheel
    Local Time:
    5:33 PM
    now theres a car i havent seen nor heard of in a long time....
     
  6. Locomotion

    Locomotion Well-Known Member

    Messages:
    2,997
    Likes Received:
    529
    Joined:
    May 31, 2004
    Location:
    Florida
    Local Time:
    6:33 PM
    At the end of the Mopar run of IROC cars, they used Avenger bodies.
     
  7. moparclown

    moparclown Well-Known Member

    Messages:
    1,708
    Likes Received:
    11
    Joined:
    Aug 19, 2008
    Local Time:
    5:33 PM
    I am really curious to what was used as far as a crank,rods and block to get that 355 ci ? And rather than going for more cubic inches as a stroker small block I was thinking of going smaller cubic inches ?
     
  8. mikedevore

    mikedevore Well-Known Member

    Messages:
    2,623
    Likes Received:
    175
    Joined:
    Jan 13, 2005
    Location:
    Oklahoma
    Local Time:
    5:33 PM
    I thought they used a std. steel head on them.
     
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.