DIY tail light gaskets?

[Cuda416]

After some crazy rain, we realized the gaskets for the tail light bezels on our 65 valiant are junk. They'd be pretty easy to make but I'm hoping someone has a good pointer to what material to use and or the specific patterns for them. If info like this is posted somewhere, pointers would be great.

 

[Murray]

Just a thought, but looking at my 'cuda, I was thinking about a big bead of silicone to augment the gasket. Let it squish out and fill the abnormalities, set up, and then trim off the excess. Maybe this would work for you.

 

[Inertia]

I used Construction " sill gasket" , cut, and paint if nec, to fit all those foam gskts..
Cheers

 

[zkx14]

This?
DMT Mopar 1964 64 1965 65 Barracuda, 1965 Valiant Taillight Tail Light Gaskets | eBay

 

[Dusterdenovo]

If DMT has them, I have always found their stuff to be perfect and relatively cheap.

 

[Cuda416]

This?
DMT Mopar 1964 64 1965 65 Barracuda, 1965 Valiant Taillight Tail Light Gaskets | eBay

Yeah these sound like the way to go. I was thinking making them would be cheap and easy but $20 is hard to beat. Thanks!

 

[zkx14]

If I can get exactly the materials I need and get it right on the first try... every once in a while making something myself comes out cheaper and occasionally better. More often NOT. Usually have to buy too much of the wrong stuff - And I eventually end up replacing it again.