Driveshaft length 833 trans to 8 3/4

[mycuda]

Have trunnion yoke conversion and a driveshaft with bigger diameter
than stock but not as long as stock. (to 7/1/4 rear)
Just wondering if someone has approx. measurement to see if length I have (52.5")
un stretched, is usable, long enough to cut?

Thanks, Dave

 

[65 Dartman]

Hay Dave - I have a conversion driveshaft for a 106 in wheelbase 65 Barracuda that measures right at 52 inches from the end of the flat where it bolts to the flat on the transmission to the end of the rear U Joint (not the center of the joint). The female conversion part is fully compressed on the spline male end.
Don

 

[KosmicKuda]

Need more info. What year and body style?

 

[mycuda]

Hay Dave - I have a conversion driveshaft for a 106 in wheelbase 65 Barracuda that measures right at 52 inches from the end of the flat where it bolts to the flat on the transmission to the end of the rear U Joint (not the center of the joint). The female conversion part is fully compressed on the spline male end.
Don

Well, Got one for sale now..for a 106 WB...LOL Need 5" longer for Dart

Thanks, Dave

 

[65 Dartman]

Keep the old conversion parts for the new driveshaft. Don't know what they run where you are but I got quoted $475 for the conversion parts to a new driveshaft