Duster 360 727 tti dougs sanderson

Mopar Exhaust Systems

  1. Styke

    Styke Member

    Messages:
    9
    Likes Received:
    1
    Joined:
    Sep 20, 2017
    Location:
    Finland
    Local Time:
    5:35 PM
    Hi there
    Sorry for beginning for several topics around this case, but i didn't found correct answer.

    My car 10/73 so "74 Plymouth Duster "gold duster" original K-member 318.
    Now it got 360 LA engine and Edelbrock Performer RPM cylinder heads. measured from dyno 400hp/550nm, stock engine bay, with polyurethan arp mounting kit.
    727 transmission with deep aluminium oilpan.
    Column shift "quite original"
    Mini starter also
    Power Steering box "quite original"
    Deep oilpan Milodon 30940, yes have to cut the K member, i've done it.

    So what is right headers for me?
    Sanderson DD8
    TTI ?
    dougs 453

    I.m losing my mind with these, also don't exactly know where is good offer?
    Please help me with this.
    Thank for everybody, keep health...
     
  2. dustya_383

    dustya_383 Well-Known Member

    Messages:
    1,161
    Likes Received:
    40
    Joined:
    Oct 7, 2009
    Location:
    san Jose Ca
    Local Time:
    7:35 AM
    I have experience with the Dougs they fit perfect on my 74 duster 410 stroker, with manual steering and a 4speed I hear TTI fit no problem also, never used sandersons.
     
  3. dodge71demon

    dodge71demon Well-Known Member

    Messages:
    3,396
    Likes Received:
    545
    Joined:
    Apr 29, 2009
    Location:
    Indiana
    Local Time:
    10:35 AM
    Can you get stuff from Autozone if so there's a round about way to get their 20% discount on the D453 even though they do not show up directly on their web site
     
  4. Tinmannz

    Tinmannz Well-Known Member

    Messages:
    298
    Likes Received:
    344
    Joined:
    Jul 29, 2019
    Location:
    ‘Anytime Baby’
    Local Time:
    8:35 AM
    He lists Finland as his location, I'm not quite so sure they have a Autozone there.

    I have a set of TTI's , fitment is not a problem, however, the price is.
     
  5. cawcislo

    cawcislo Well-Known Member

    Messages:
    335
    Likes Received:
    216
    Joined:
    Aug 7, 2018
    Location:
    Ontario, Canada
    Local Time:
    10:35 AM
    I used dougs on my 70duster 318. Had some small figment adjustments I had to make as the torsions bars were touching or super close to touching on both sides< but other people said it fit no problem with no mods. Other than bending the clutch z bar it was fairly straight forward and went well. With TTI and dougs headers you need to modify your z bar. Don’t know about Sanderson. You can heat and make a couple bends with a vice and hammer it should look something like this when completed. 5C074EC2-D9CC-4B2D-9750-708B5D7B59D5.png
     
  6. fklskv

    fklskv Well-Known Member

    Messages:
    1,197
    Likes Received:
    645
    Joined:
    Aug 14, 2011
    Location:
    Lackawanna, NY
    Local Time:
    10:35 AM
    I have tti’s. Slip right in from the bottom. As far as price, there are some things where price comes in second. Headers on A-bodies is one of those things.

    Anyone with Dougs or TTI will tell you that.
     
    • Agree Agree x 3
    • stroked340

      stroked340 FABO Gold Member FABO Gold Member

      Messages:
      4,652
      Likes Received:
      1539
      Joined:
      Jun 14, 2014
      Location:
      mass.
      Local Time:
      10:35 AM
      TTI's have used them on 2 duster expensive but worth the money..
       
      • Agree Agree x 1
      • dodge71demon

        dodge71demon Well-Known Member

        Messages:
        3,396
        Likes Received:
        545
        Joined:
        Apr 29, 2009
        Location:
        Indiana
        Local Time:
        10:35 AM
        I'm in the process of doing this way http://www.ttiexhaust.com/MoparClassics-Headers/360W5ED/FN55-SHT340ZB.pdf
         
      • dano

        dano Evil Handy Man

        Messages:
        3,502
        Likes Received:
        1389
        Joined:
        Aug 22, 2005
        Location:
        Gresham, Oregon
        Local Time:
        7:35 AM
        I had issues with my Doug's clearing the steering coupler at the power box. Others have not had issues and there are work arounds, depends on what your willing to do.
         
      • Styke

        Styke Member

        Messages:
        9
        Likes Received:
        1
        Joined:
        Sep 20, 2017
        Location:
        Finland
        Local Time:
        5:35 PM
        Hi, thanks!
        Yes i can get those from there, i have to order this quite soon, so it will get to ship and contain. I found also coupon for AZ:to get discount.

        Thanks for answers, i think TTI:s, but price.. ;(
        Dougs and sanderson are same price..
         
      • Styke

        Styke Member

        Messages:
        9
        Likes Received:
        1
        Joined:
        Sep 20, 2017
        Location:
        Finland
        Local Time:
        5:35 PM
        Nice, this sound good.
        How about steeringcolumn shifter, does it fit?
        And Milodon..oilpan.

        I have tryed flowtech, they were from deep...there from sunny is not shine..
        Throw to trashcan.
         
      • Styke

        Styke Member

        Messages:
        9
        Likes Received:
        1
        Joined:
        Sep 20, 2017
        Location:
        Finland
        Local Time:
        5:35 PM
        You've got different case.
        Manual steering is much more easier, i think.
        And if you got floorstick that is also easier..
        But thanks anyway.
         
      • Styke

        Styke Member

        Messages:
        9
        Likes Received:
        1
        Joined:
        Sep 20, 2017
        Location:
        Finland
        Local Time:
        5:35 PM
        Which model from TTI:s you have replacement?
         
      • stroked340

        stroked340 FABO Gold Member FABO Gold Member

        Messages:
        4,652
        Likes Received:
        1539
        Joined:
        Jun 14, 2014
        Location:
        mass.
        Local Time:
        10:35 AM

        340a-c1...
         
      • dano

        dano Evil Handy Man

        Messages:
        3,502
        Likes Received:
        1389
        Joined:
        Aug 22, 2005
        Location:
        Gresham, Oregon
        Local Time:
        7:35 AM
        I have a 4 speed car now with a TKO 600. I use a Kevco oil pan and it cleared fine.
         
      • supertruck

        supertruck Retired Old Fart stock car racer FABO Gold Member

        Messages:
        681
        Likes Received:
        327
        Joined:
        Feb 14, 2016
        Location:
        Gloucester, Va
        Local Time:
        10:35 AM
        Check out Schumacher Tri-Y's.
         
      • Styke

        Styke Member

        Messages:
        9
        Likes Received:
        1
        Joined:
        Sep 20, 2017
        Location:
        Finland
        Local Time:
        5:35 PM
        Small Block Tri-Y Headers

        These you mean, price is more than TTI:s.
        I have'nt decided yet, as you see..
         
        • Like Like x 1
        • cawley

          cawley 383 Bcuda

          Messages:
          2,123
          Likes Received:
          446
          Joined:
          Sep 10, 2013
          Location:
          milton
          Local Time:
          10:35 AM
          a few weeks ago I ordered a set of dougs on autozones web site I used the 20% code its a very good price BUT two weeks after a ordered them autozone sent me an email & they said that the A body small block headers were out of stock & they didn't know when they were going to be able to get more. So they sent my money back.
           
        • abodyjoe

          abodyjoe Well-Known Member

          Messages:
          21,165
          Likes Received:
          6613
          Joined:
          May 22, 2004
          Location:
          Berlin,N.J. 08009
          Local Time:
          10:35 AM
          call summit and get them to price match that 20% off. :)
           
        • cawley

          cawley 383 Bcuda

          Messages:
          2,123
          Likes Received:
          446
          Joined:
          Sep 10, 2013
          Location:
          milton
          Local Time:
          10:35 AM
          mmm didn't know they did that I ordered the bare ones & with shipping & the 20% off they were alittle over 400
           
        • Styke

          Styke Member

          Messages:
          9
          Likes Received:
          1
          Joined:
          Sep 20, 2017
          Location:
          Finland
          Local Time:
          5:35 PM
          Did you get these 400 bucks?
          Doug's Headers D453
           
        • cawley

          cawley 383 Bcuda

          Messages:
          2,123
          Likes Received:
          446
          Joined:
          Sep 10, 2013
          Location:
          milton
          Local Time:
          10:35 AM
          no I ordered the bare ones from autozone I used a promo code that I was given & they said that they are out of stock they sent my money back
           
        • Styke

          Styke Member

          Messages:
          9
          Likes Received:
          1
          Joined:
          Sep 20, 2017
          Location:
          Finland
          Local Time:
          5:35 PM
          Yes, that you said, now i got it. Learn english, ;)
          I try to order TTI:s, but they said it will take weeks until i get them.
          Shipcontainer will upload next week monday, is there any other option to get those so quickly? 340A-C2 wanted..
           
        1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
          By continuing to use this site, you are consenting to our use of cookies.