[SOLD] Edelbrock D64 or Offenhauser

-
Status
Not open for further replies.
I have a D-64 that I would part with. send PM with proposed price Plus shipping. How the heck would I ship it to Sweden? This is to actually use on a car that you would drive right??

I'm in Washington state 98070

Once I get your PM, I'll send pictures

Mike Dawson

PS: Edelbrock sells a set of 500 cfm Performer carbs (AFB) for progressive linkage dual quads that I would recommend with this set up. The d-64 is a much better choice than the
Offenhauser (I've used both). The Offenhauser is a single plane manifold with VERY short runners that are problematic if you intend to use the car on the street.
 
The D64 will have more bottom end torque VS the Offenhauser's higher torque band. If that helps any.
 
Ship it to me, I ship stuff to Ulf all the time....no big deal....intake is "small beans" compared to some stuff he has recieved from me :glasses7:

str12-340 said:
I have a D-64 that I would part with. send PM with proposed price Plus shipping. How the heck would I ship it to Sweden? This is to actually use on a car that you would drive right??

I'm in Washington state 98070

Once I get your PM, I'll send pictures

Mike Dawson

PS: Edelbrock sells a set of 500 cfm Performer carbs (AFB) for progressive linkage dual quads that I would recommend with this set up. The d-64 is a much better choice than the
Offenhauser (I've used both). The Offenhauser is a single plane manifold with VERY short runners that are problematic if you intend to use the car on the street.
Click to expand...
 

Thanks for the response. I have sent a PM str12-340. And thanks Keith for helping me out with shipping. :burnout:
 
Status
Not open for further replies.
-
Back
Top Bottom