[FOR SALE] **Edelbrock Heads, RPM Performer & Rods.**

-
Status
Not open for further replies.

Mad Dart

Nothing to see Here!
Joined
Sep 24, 2008
Messages
8,483
Reaction score
490
Location
Murrieta California
Rating - 100%
5   0   0
Contact seller
$2000.00 for all. Fits SMALL BLOCK MOPAR

Edelbrock Aluminum Heads done by Brian at IMM Engines, set up for Solid Roller Cam. 65.5CC Chambers. The intake is port matched. Intake valves are 2.02 Exhaust is 1.60. They flow around 300CFM.

The rods are standard H Beams 6.123 big Journal.

Buyer pays for shipping.

PM me.

IMG_6094-1.JPG


IMG_6096-1.JPG


IMG_6098-1.JPG


IMG_6099-1.JPG


IMG_6102-1.JPG


IMG_6104-1.JPG


IMG_6091-1.JPG


IMG_6092-1.JPG


IMG_6106-1.JPG


IMG_6109.JPG
 
Last edited:
Your inbox is full.
Will you sell rods separately?
What brand/part#/bolt info?
Thanks for any info
Mike
 
Your inbox is full.
Will you sell rods separately?
What brand/part#/bolt info?
Thanks for any info
Mike

Inbox fixed... Thank you.

They are the same rods I have in my 410 CI Small Block. Mine sees 7400 RPM on the bottle for a long time now with no issues at all. I believe they are Falcon's, Most are the same and finish machined by different companies as far as I know. 7/16 hardware
 
$2000.00 for all. Fits SMALL BLOCK MOPAR

Edelbrock Aluminum Heads done by Brian at IMM Engines, set up for Solid Roller Cam. 65.5CC Chambers. The intake is port matched. Intake valves are 2.02 Exhaust is 1.60. They flow around 300CFM.

The rods are standard H Beams 6.123 big Journal.

Buyer pays for shipping.

PM me.

View attachment 1715467855

View attachment 1715467856

View attachment 1715467857

View attachment 1715467858

View attachment 1715467859

View attachment 1715467860

View attachment 1715467853

View attachment 1715467854

View attachment 1715467861

View attachment 1715467862

IMG_6312.JPG


View attachment 1715468537

IMG_6314.JPG


IMG_6315.JPG


IMG_6317.JPG


IMG_6318.JPG


IMG_6319.JPG


IMG_6303-1.JPG


IMG_6306-1.JPG


IMG_6307-1.JPG
 
Good setup and good price Brian does great work
 
Inbox fixed... Thank you.

They are the same rods I have in my 410 CI Small Block. Mine sees 7400 RPM on the bottle for a long time now with no issues at all. I believe they are Falcon's, Most are the same and finish machined by different companies as far as I know. 7/16 hardware
Was this the setup you were using the CAT gear drive on? If so, hows it been over the years?

Jake
 
Status
Not open for further replies.
-
Back
Top