[WANTED] Engine harness

[440seven]

Swapping a big block in and looking for a clean engine harness to use. Let me know what ya got. Thanks!

It's for a 440 going in a 72 duster.

 

[Dartn440]

I'm just going to throw this out there that since there was never a big block your best bet is a V8 harness. Just going to need to extend the distributor wire to the front of the motor. Let me look under the hood of a 73 I just picked up.

 

[halifaxhops]

I have a good one from a 74 SE I picked up and did not use. 6 cyl

 

[halifaxhops]

I did the same in a 74, I actually reused all the plugs and made it custom for my application, sounds hard but was actually pretty easy you just need some Packard 56 connectors and the proper crimp tool.

 

[440seven]

Dartn440 let me know. need everything from the bulkhead up. The one in mine was hacked up far too much to reuse.

 

[belmateo]

I have a good one from a 74 SE I picked up and did not use. 6 cyl

6 cyl. harness is better since the coil is closer to the front of the motor