Floor pan,74 Duster

Mopar Body and Trim

  1. MoparMurf

    MoparMurf Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Nov 5, 2008
    Local Time:
    7:08 AM
    I am looking to buy a 74 Duster,it needs a full floor pan, Does anyone sell the full one piece pan or do you have to buy pieces
     
  2. rumblefish360

    rumblefish360 I have escaped the evil Empire State! FABO Gold Member

    Messages:
    41,761
    Likes Received:
    14008
    Joined:
    Jun 21, 2005
    Location:
    Florida
    Local Time:
    8:08 AM
    The entire floor from front firewall to rear clip?

    No. The best I have seen is just the feet sections.
     
  3. 74Dusterkid

    74Dusterkid Well-Known Member

    Messages:
    314
    Likes Received:
    3
    Joined:
    Dec 30, 2008
    Location:
    pottstown, pa
    Local Time:
    8:08 AM
    yea i have only ever found the sections and trust me i needed them too. but i found a better base car to work with now. but i have only ever seen the parts unless you cut one out of a donor car.
     
  4. MoparMurf

    MoparMurf Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Nov 5, 2008
    Local Time:
    7:08 AM
    Who has the best price on floor pans
     
  5. rumblefish360

    rumblefish360 I have escaped the evil Empire State! FABO Gold Member

    Messages:
    41,761
    Likes Received:
    14008
    Joined:
    Jun 21, 2005
    Location:
    Florida
    Local Time:
    8:08 AM
    There all preety close on prices. Shipping can be the balance tiper depending on who the ship with.

    Year One for example use's the very expensive UPS
     
  6. 68383GTS

    68383GTS Well-Known Member

    Messages:
    7,378
    Likes Received:
    973
    Joined:
    Nov 15, 2007
    Location:
    East Peoria,IL
    Local Time:
    7:08 AM
    Auto Metal Direct has a 1 piece floor pan now for the Darts and Dusters
    Jim
     
  7. rumblefish360

    rumblefish360 I have escaped the evil Empire State! FABO Gold Member

    Messages:
    41,761
    Likes Received:
    14008
    Joined:
    Jun 21, 2005
    Location:
    Florida
    Local Time:
    8:08 AM
    Nice! Like I described? Firewall to rear clip?
     
  8. Jimacuda

    Jimacuda Well-Known Member

    Messages:
    1,776
    Likes Received:
    625
    Joined:
    Nov 10, 2006
    Location:
    Phoenix AZ
    Local Time:
    6:08 AM
    AMD's is in 3 pieces and over $500+ shipping.
    Check in parts for sale here, I believe member Crackedback has a very nice factory full pan for sale at half that price.
     
  9. Small Block

    Small Block Well-Known Member

    Messages:
    5,213
    Likes Received:
    12
    Joined:
    Jan 29, 2005
    Location:
    West Plains, Mo.
    Local Time:
    1:08 PM
    Guys: From my experience after cutting out an entire floor i cut it in half long ways for ease of installation, then use seam sealer. That would be a bitch to get a whole one in the cockpit.
     
  10. crackedback

    crackedback FABO Gold Member FABO Gold Member

    Messages:
    18,162
    Likes Received:
    3468
    Joined:
    Aug 7, 2005
    Location:
    92201
    Local Time:
    5:08 AM
    I've got one and it's less expensive than anything you can get at AMD. AMD parts will cost you close to $600 and it's not complete. Interesting on the new full pan. Be fun fitting that with no guides. I wonder if the drains are in the right spot and has all of them.

    [​IMG]

    $250 plus shipping from CA. I can split it down the middle to ease shipping cost via Greyhound or FedEx, or can send it whole, but will be expensive. If you know someone going to Spring Fling or MATS I can likely get it to either place, cheap like $30.

    You can get them in whole. I get them out that way.
     
  11. 68383GTS

    68383GTS Well-Known Member

    Messages:
    7,378
    Likes Received:
    973
    Joined:
    Nov 15, 2007
    Location:
    East Peoria,IL
    Local Time:
    7:08 AM
    Sorry Jimacuda I just got my new AMD catalog and they do sell a 1 piece complete floor pan for A Bodys!
    Floor pan OE style Part# 400-1267 $429.95
    This pan goes from the bottom of the firewall up to bottom of the rear seat and from rocker to rocker.
    Auto metal direct 866-591-8309
    Jim
     
  12. 340sFastback

    340sFastback Well-Known Member

    Messages:
    3,408
    Likes Received:
    80
    Joined:
    Mar 25, 2007
    Location:
    Maryland
    Local Time:
    7:08 AM
    If you down load their catalog you'll see the a-body floors. I don't know if they are shipping yet or not:

    http://www.autometaldirect.com/

    That one crackedback has is nice. No substitute for good original metal.
     
  13. crackedback

    crackedback FABO Gold Member FABO Gold Member

    Messages:
    18,162
    Likes Received:
    3468
    Joined:
    Aug 7, 2005
    Location:
    92201
    Local Time:
    5:08 AM
    I heard they aren't available for a few more months.

    I also agree there is absolutely no substitute for factory metal. The chinese stuff has some pretty rotten metallurgy. It's not anywhere near as tough as the old goat pieces. I ALWAYS choose original panels vs. aftermarket stamping when available.

    Plus, mine has a bunch of guide holes for alignment already... :-D
     
  14. green1

    green1 Well-Known Member

    Messages:
    4,639
    Likes Received:
    21
    Joined:
    Dec 6, 2008
    Location:
    Orange Park, Fla
    Local Time:
    7:08 AM
    ss
     
  15. GTXperience

    GTXperience Orig Stealth Mod

    Messages:
    6,518
    Likes Received:
    229
    Joined:
    Jul 13, 2007
    Location:
    Sacramento Area, CA
    Local Time:
    5:08 AM
    If you can find solid OEM sheetmetal that was correctly removed, I would go with that vs the repop pieces (especially, if it were half the cost).
     
  16. BlkArrow

    BlkArrow Well-Known Member

    Messages:
    286
    Likes Received:
    0
    Joined:
    Apr 6, 2008
    Location:
    Connecticut
    Local Time:
    8:08 AM
    There is a thread somewhere in the resto section...you could buy a full pan from AMD when they come out. Or else you could buy half pans from Auto Body Specialties(not out yet, I'm on a list of people who they will call when they do though). Either way it is about time that they start producing this.
     
  17. Jimacuda

    Jimacuda Well-Known Member

    Messages:
    1,776
    Likes Received:
    625
    Joined:
    Nov 10, 2006
    Location:
    Phoenix AZ
    Local Time:
    6:08 AM

    You are correct Jim, I was going by their "online parts list".

    I'd still prefer original panels when available.
     
  18. 340sFastback

    340sFastback Well-Known Member

    Messages:
    3,408
    Likes Received:
    80
    Joined:
    Mar 25, 2007
    Location:
    Maryland
    Local Time:
    7:08 AM
    Its the fit of the original metal that is appealing to me. Can't beat original for fit.
     
  19. moparisbest

    moparisbest Well-Known Member

    Messages:
    881
    Likes Received:
    134
    Joined:
    May 9, 2009
    Location:
    kansas
    Local Time:
    7:08 AM
    i got the full floor pan shiped to my work i forget the price but floor pan quarters and inter and outer wheel wells and tail pan was like 200 shiping 104.jpg

    104.jpg
     
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.