FOR SALE 67 68 69 70 71 Rallye Dash Gauge Circuit Boards Cuda Dart Duster 340

[66340SEDAN]

For sale is a bunch of used circuit boards, bigger boards have part number 2771651 on them, the smaller ones have part number 2771652 on them. 2 different colors but all appear to be the same.

5 of these...The bigger one, part number 2771651, 2 only have 1 pin missing on the back, the other 3 each have 3 pins missing. I believe these can be fixed, otherwise they look nice and clean, not fried either. $5 each

4 of these...The smaller ones, part number 2771652, one has all the pins, one is missing 1, the other 2 have 2 missing 2. I believe these can be fixed. $10 for the one with all the pins, $5 each for the others.

Shipping will be $5 wether you want 1 or all of them. They are going in a small flat rate USPS box to make sure they arrive safe, they won't survive being shipped in an envelope. I am in central MN, thanks FABO!!

 

[66340SEDAN]

Sale pending on the small L-shaped one with all the pins.

 

[RedFish]

I've seen the top pin broke out of that small board too many times. I guess it gets hit when the panel is going in/out of the dash. I recently saw a cure for it too. The original connector had the wires cut and a pig tail from a trailer harness added on. That moves the service disconnect to a remote location so the factory connector never needs pulled off the board pins again. Any 3 wire connector could be used. The trailer hitch connectors were a nice choice though since it has a similar appearence.

 

[67Dart273]

I "sorta" did the same thing to mine with both connectors, used Molex style connectors from Radio Shack. My originals were all torn up badly

 

[66340SEDAN]

I've seen the top pin broke out of that small board too many times. I guess it gets hit when the panel is going in/out of the dash. I recently saw a cure for it too. The original connector had the wires cut and a pig tail from a trailer harness added on. That moves the service disconnect to a remote location so the factory connector never needs pulled off the board pins again. Any 3 wire connector could be used. The trailer hitch connectors were a nice choice though since it has a similar appearence.

I "sorta" did the same thing to mine with both connectors, used Molex style connectors from Radio Shack. My originals were all torn up badly

Good to know, Thanks for the tips!!

 

[66340SEDAN]

The smaller one with all the pins is sold!

Other still available...

 

[66340SEDAN]

Still have...maybe pins from one can be soldered back on another that is missing them? Anyone?

 

[66340SEDAN]

:toothy8: