[FOR SALE] Garage odds and ends, Magnum V8

[DodgeLad]

16 Trick Flow hardened pushrods, new, 6.75" x 5/16" x .080" $60
16 pushrods, like new 6.8" x 5/16" x .080" $30
box of unknown pushrods, not a complete set of anything, free with purchase
$75 for everything

8 Magnum V8 49 psi injectors, came off a 1998 Jeep Grand Cherokee 5.9 w/98k miles, my system is 39psi so of no use to me $50

free Haynes manual to whomever wants it, I have two of them *GONE*

Aussie locker, almost new, my wife didn't like it, specs in pic $150

shipping is on your dime

 

[Dana]

I could use that chilton for my 84 D350.

 

[JoePole1]

Dumb question but what is the .080" dimension on tye pushrods?

 

[Garrett Ellison]

The shat diameter should be 5/16" (.3125) and the .080 should refer to the wall thickness.

 

[DodgeLad]

If you are interested in any of this stuff, make an offer before I get rid of it locally (pretty much donate). The worst that can happen is that I say no.

 

[Demonracer]

What does the Aussie locker fit year wise?

 

[DodgeLad]

What does the Aussie locker fit year wise?

Here is what Torqmasters say, but I'm almost certain it fits XJs and more. Even older stuff, but I would need to look. What you got?
Aussie Locker XD-13530 Dana 35 w/ Hardened Cross Shaft (Jeep Dana 35 Differential 94 newer) | Locking Differential | Aussie Locker By Torq Masters

Did some looking, fits all Dana-35 c-clip axles.

 

[diymirage]

im thinking that those injectors may work out with one of these intakes


[FOR SALE] - small block EFI intake manifolds | For A Bodies Only Mopar Forum


i know, different seller, but who knows, it may be of help for someone

 

[DodgeLad]

After looking at what I have and the manifold pics, I think the rails and injectors will line up to the injector ports. The mounting tabs on the rails may need customized.