[WANTED] Glove box light switch

[4spdragtop]

Looking for 67 barracuda GB lite switch. This one works but connection is **** and not sure if switch can be disassembled to solder in new wire. I know the 67-9 Mustang one is very similar.

 

[1969383S]

Is that your switch? Can you not clean it?

 

[65 Dartman]

I think I might have one; I can check

 

[j061093409]

From 1970-2 Darts. Comes only with light package option.

 

[4spdragtop]

It works, but where wire attaches is frayed. Cant remove metal tang wire attaches to for adding a new wire.

Is that your switch? Can you not clean it?

Does that one take a bulb at the opposite end of switch? How much?

From 1970-2 Darts. Comes only with light package option.

View attachment 1715951035

View attachment 1715951036

View attachment 1715951038

 

[winky]

Remove the connector by pushing the tang in the small square hole with a small screwdriver in the direction the screwdriver is facing in this picture and then pull the wire.

In a pinch you might be able to open up the crimp, cut and strip to good wire, re-crimp then reinsert the connector.

I don't want to scoop anyone's sale but you can have the switch and connector in the pictures, there's enough wire there I think you could solder your wire to, just PM me your address.

 

[4spdragtop]

Thanks Winky for the explanation AND the offer! Lemme see if I can get the tang removed and then rewire it.
MUCH appreciated!

Remove the connector by pushing the tang in the small square hole with a small screwdriver in the direction the screwdriver is facing in this picture and then pull the wire.
View attachment 1715951447
View attachment 1715951448
In a pinch you might be able to open up the crimp, cut and strip to good wire, re-crimp then reinsert the connector.

I don't want to scoop anyone's sale but you can have the switch and connector in the pictures, there's enough wire there I think you could solder your wire to, just PM me your address.
View attachment 1715951449