Headman headers block huggers 78500

[ronk4]

these will not fit a 64 barracuda. Passenger side OK Drivers side is a nightmare. This is from my own exp. Ron

 

[RustyRatRod]

If you relocate the number one tube from the collector to the number three tube, it will fit. Even with power steering. There are pics floatin around here somewhere where somebody did it.

 

[ronk4]

Thats exactly what I did. Took a while but I got er done !!!:burnout:

 

[RustyRatRod]

Do you have some pics? I cannot find the others I was referring to. I'd love to send pics to Hedman. It's such a simple mod, they might make a set to fit the early cars. It's worth a shot.

 

[jerry6]

Do you have some pics? I cannot find the others I was referring to. I'd love to send pics to Hedman. It's such a simple mod, they might make a set to fit the early cars. It's worth a shot.

+1 like to see the mod

 

[63 MorePar]

If you relocate the number one tube from the collector to the number three tube, it will fit. Even with power steering. There are pics floatin around here somewhere where somebody did it.

Like this. It fit like a glove but getting around the steering linkage tricky.
Larry

 

[63 MorePar]

Do you have some pics? I cannot find the others I was referring to. I'd love to send pics to Hedman. It's such a simple mod, they might make a set to fit the early cars. It's worth a shot.

I should have patented them while I had the chance. :banghead: lol

Don't waste money on the coated ones (like I did) cuse' your just going to cut them up any way. I sent the left side back to Jet Hot to recoat after I modified them. I sold them to a member and have not heard how they worked out on his project. Good luck it can be done!
Larry

 

[RustyRatRod]

Thanks for posting those! That's exactly the one I was talking about.