Hole in the hood

-

K.O. SWINGER

Meeting in the alley since 1976
Joined
Nov 18, 2010
Messages
2,808
Reaction score
2,785
Location
oregon
This is currently on sale at eBay you just don't see these very often

Screenshot_2020-02-23-15-44-55.png
 
Those bolt angles look >65 LA to you? :rolleyes:

IIRC these were based on the 65 dual quad intake. could have changed the casting # (5488?) but the one I saw for sale had the 65 odd bolt angle DQ PN.
 
no not mine I just saw it on eBay and wanted to bring it to members attention
I was just asking because you had bumped it like you were bumping your ad... Also because you're here in Oregon and I was thinking about some horse-trading.. but finding out it could possibly not fit and be for a 65 or older...
 
Looks just like mine @j par.

If you can look at it in person i can give you numbers off mine?

If i was gonna do it again i would just call the guy in Australia and buy his manifold for the price a bastardized small block blower manifold costs..

That one looks unused. A new one made here costs 1,500.00 and is still a modified, ugly bastard.
 
Last edited:
7FC3B3F1-A57D-4545-8ABB-3EC734D01537.jpeg
C4F6EEF0-6A25-4240-92A9-C97F1C87F626.jpeg
Two months ago I tried purchasing a StrokerSul 671 SB Mopar manifold. It was $500 US dollars..... Plus $60 shipping. I tried making the deal work but Flavio from StrokerSul was shady, at best... lol
They are no longer available.....
 
View attachment 1715491858 View attachment 1715491859 Two months ago I tried purchasing a StrokerSul 671 SB Mopar manifold. It was $500 US dollars..... Plus $60 shipping. I tried making the deal work but Flavio from StrokerSul was shady, at best... lol
They are no longer available.....

I like the look of that one. A lot lower profile and the thermostat is out the front. Do the attaching bolts go in through the plenum area?

Jack
 
Hi Jack, I hope all is well.
Oddly enough there are no port dividers in the runners and no pop off valve....
The bolts go in the “void” area below
the blower but outside of the plenum.

1A566AF7-86F9-4EFB-AF5C-B2DC73DB8CF8.jpeg
55C26A56-568D-4301-9C9C-B6F0D906A424.jpeg
F1DFB804-25BB-40E5-9906-A2E5F7F4DAFE.jpeg
5639AED1-CDCE-43A2-9F2C-2F9AF7E59E79.jpeg
4E9FEDF4-98E5-4939-9C38-CC36B26E943A.jpeg
43316939-BF75-4091-9E57-68FC875F4276.jpeg
BB0E6D78-777F-4100-BB18-93310F6B3ABA.jpeg
789024FD-0CF8-4DE3-8C15-D89FB9F03211.jpeg
 
Hi Jack, I hope all is well.
Oddly enough there are no port dividers in the runners and no pop off valve....
The bolts go in the “void” area below
the blower but outside of the plenum.

View attachment 1715492235 View attachment 1715492236 View attachment 1715492237 View attachment 1715492238 View attachment 1715492239 View attachment 1715492240 View attachment 1715492241 View attachment 1715492242
Hi Jack, I hope all is well.
Oddly enough there are no port dividers in the runners and no pop off valve....
The bolts go in the “void” area below
the blower but outside of the plenum.

View attachment 1715492235 View attachment 1715492236 View attachment 1715492237 View attachment 1715492238 View attachment 1715492239 View attachment 1715492240 View attachment 1715492241 View attachment 1715492242
wow that manifold looks Burl is there a manufacturer's name on it
 
Hi Jack, I hope all is well.
Oddly enough there are no port dividers in the runners and no pop off valve....
The bolts go in the “void” area below
the blower but outside of the plenum.

View attachment 1715492235 View attachment 1715492236 View attachment 1715492237 View attachment 1715492238 View attachment 1715492239 View attachment 1715492240 View attachment 1715492241 View attachment 1715492242

The port dividers wouldn't be an issue I don't think. The heads will do that. But no pop off valve could be a real issue. The bolts would be ok where they are as long as you can get a torque wrench on them.

Jack
 
-
Back
Top