How to: Dual Brake Circuit System Install on Early A Body

[AW-100]

AW-100 submitted a new Article:

How to: Dual brake circuit system install on early A

My 1965 Plymouth Barracuda came with single circuit brakes. Here's how I converted the old girl to dual circuit.

Old single circuit MC.

I started out with a Raybestos MC36221 for a 1967...

Read more about this article here...

 

[jobrated_man]

AW-100 submitted a new Article:

How to: Dual brake circuit system install on early A



Read more about this article here...

I am wondering if you were able to use the original push rod with the new cylinder, or did you have to get another rod and make adjustments for length?

 

[Tadams]

Thanks for the information. I need to do this to my 65

 

[Gerald bellows]

AW-100 submitted a new Article:

How to: Dual brake circuit system install on early A



Read more about this article here...

AW-100 submitted a new Article:

How to: Dual brake circuit system install on early A



Read more about this article here...

heythanks for the info and taking the time to do it

 

[Gerald bellows]

Thanks for the information. I need to do this to my 65

Thanks for the information. I need to do this to my 65

Thanks for taking time to list everything as well as pictures job well done

 

[RustyRatRod]

I like your approach. Normally, people add a distribution block with an extra port, but you didn't go that route. Just one more way to skin a cat.

 

[Torch]

I am wondering if you were able to use the original push rod with the new cylinder, or did you have to get another rod and make adjustments for length?

AW-100 submitted a new Article:

How to: Dual brake circuit system install on early A



Read more about this article here...

Hello,,, very helpful and I to wondering if you can use the pushrod from the single M.C.?
Thanks, torch.

 

[Torch]

AW-100 submitted a new Article:

How to: Dual brake circuit system install on early A



Read more about this article here...