Thread Status:
Not open for further replies.
  1. plumkrazee70

    plumkrazee70 Well-Known Member

    Messages:
    3,062
    Likes Received:
    938
    Joined:
    May 5, 2013
    Location:
    Medford, Oregon
    Local Time:
    3:20 PM
    Contact Seller
    Bare 2.02 Intake J heads for sale. Part# 3418915

    They have been checked for cracks and are good.

    I don't have a micrometer to check to see if they are 2.02 valve size. I'm going to try and aquire one this week to verify.

    I would like to trade for A Body 73+ Disc Brake Setup complete (Prefer SBP) or sell for $250 + shipping.

    Thanks.

    [​IMG]Uploaded with ImageShack.com
    [​IMG]Uploaded with ImageShack.com

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Demonracer

    Demonracer 71 Demon 00 Ram 16 Chrysler 300S 05 Caravan FABO Gold Member

    Messages:
    5,227
    Likes Received:
    3281
    Joined:
    Jan 31, 2010
    Location:
    Cleveland, Texas
    Local Time:
    3:20 PM
    From your pictures of the combustion chambers, they look to be 2.02 intake valves. Do you have any of the hardware, valves, keepers, retainers, or anything else that go with them?
     
  3. plumkrazee70

    plumkrazee70 Well-Known Member

    Messages:
    3,062
    Likes Received:
    938
    Joined:
    May 5, 2013
    Location:
    Medford, Oregon
    Local Time:
    3:20 PM
    I had the valves, springs, and retainers, but the machine shop said the valves and springs were out of spec and needed replacing. I bought a micrometer today, but and having a hard time finding where to measure.
     
  4. Saetun

    Saetun Sinister Swinger

    Messages:
    1,465
    Likes Received:
    43
    Joined:
    Nov 7, 2010
    Location:
    Pittsburg, CA
    Local Time:
    1:20 PM
    Use internal jaws (small ones on the back) of a set of dial or vernier calipers on the id of the valve seats. Easy, peasy, lemon squeezy.
     
  5. pishta

    pishta I know I'm right....

    Messages:
    21,358
    Likes Received:
    10759
    Joined:
    Oct 13, 2004
    Location:
    Tustin, CA
    Local Time:
    1:20 PM
    When the valve seats form that "cleavage" between them thats usually a good sign that they are 2.02 seats. J's can be either.
     
    • Like Like x 1
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      That's what I thought. I will measure the valve seat and take a pic.
       
    • Dartnut

      Dartnut Don't hate me because i'm beautiful

      Messages:
      11,737
      Likes Received:
      4775
      Joined:
      Apr 19, 2007
      Location:
      Southern Alberta
      Local Time:
      2:20 PM
      They didn't make sbp disc brakes from '73 and up, you are looking for '72 and older.
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      Ah! Thanks for this info. Maybe I will just have to go BBP and swap the rear axles later.
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      Updated. Measured Intake seats and they look to be 2.02 heads to me.
       
    • SGBARRACUDA

      SGBARRACUDA ROY FABO Gold Member

      Messages:
      21,465
      Likes Received:
      9958
      Joined:
      Dec 7, 2006
      Location:
      PLANT CITY FL. and PERRY GA.
      Local Time:
      4:20 PM
      Yup, took the words out my mouth. When you've seen 2.02 heads, after a while you can look at the "space" between the valves and know what size intake valves they have.
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      Well it looks to be confirmed... 2.02 Intake valves.

      Someone buy these! :)
       
    • RustyRatRod

      RustyRatRod I was born on a Monday. Not last Monday. FABO Gold Member

      Messages:
      79,291
      Likes Received:
      57634
      Joined:
      Jun 7, 2010
      Location:
      Georgia
      Local Time:
      4:20 PM
      Your heads have cleavage.
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM

      Even more reason to buy them! :)

      Bump
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      bump! Offers?
       
    • Drg racr

      Drg racr Well-Known Member

      Messages:
      405
      Likes Received:
      10
      Joined:
      Jul 31, 2012
      Location:
      East Central Indiana
      Local Time:
      3:20 PM
      Wouldn't mind them. But, gotta sell my B-body rear first.
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      keep me posted.

      bump!
       
    • winstoninwisc

      winstoninwisc Taint easy livin free,season ticket ona 1wayride

      Messages:
      2,332
      Likes Received:
      117
      Joined:
      Aug 1, 2012
      Location:
      sun prairie wi.
      Local Time:
      3:20 PM
      280.00shipped as long as they have been magged and tank tested not to leak ah shit 300.00 it will cost 75.00 to send to 53590 wisc send me a pm with pay pal address if no stripped holes or broken bolts if your interested in the offer jon
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      They have been magged, but thats it. No broken bolts or stripped holes I can see.
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      $200 + shipping?

      Anyone?
       
    • pishta

      pishta I know I'm right....

      Messages:
      21,358
      Likes Received:
      10759
      Joined:
      Oct 13, 2004
      Location:
      Tustin, CA
      Local Time:
      1:20 PM
      Your sig has cleavage...va voom.!
       
    • plumkrazee70

      plumkrazee70 Well-Known Member

      Messages:
      3,062
      Likes Received:
      938
      Joined:
      May 5, 2013
      Location:
      Medford, Oregon
      Local Time:
      3:20 PM
      Sold.
       
    Thread Status:
    Not open for further replies.
    1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
      By continuing to use this site, you are consenting to our use of cookies.