Jeg"s

-

leblanc

member 2883
Joined
Jun 5, 2006
Messages
2,212
Reaction score
384
Location
Dieppe, New Brunswick, Can.
I sent an email to Jeg's last week, after getting thier "christmas specials" and I asked them to promote more the MOPARS rather than just the GM's. They answered me back and said they did this before and would try to do it again in the near futur. I will let you know if anything happens.
 
my brother was the buyer for jegs for several years is why they use to have more mopar stuff,hes no longer with them and they are all about chevy junk ,my computer just about blew up for typing the word chevy
 
I had to reboot three times after trying to type C---y
my f just barely works.
yikes
How old do you have to be to qualify as a senior citizen member?
 
Blame Mopar, they stop building the big blocks in 1979.

They stop making 2 door rear wheel drive cars in like 81-83.

They messed up the 318's in the early 90's and stop making 360's a few years later on.

Theres little repo stuff being made compare to all the stuff GM and Ford have for old cars, like hoods, bumpers, etc.

So who calls and orders Mopar stuff everyday, not as many as Chevy and Ford guys.

Jeg's, Summit are about making $$$, not about making friends.
 
You should give your business to places that support Mopars more. I like Mancini racing from time to time. They have good stuff and decent prices. They are 100% Mopar!
 

I had to reboot three times after trying to type C---y
my f just barely works.
yikes
How old do you have to be to qualify as a senior citizen member?

1.When you're old enough to get an AARP card.
2. When you really dreaded to drive when it was cold because you had nylon cord tires. Where do you think the phase 'thumpity thump thump' came from.

That will do for starters. LOL
 
Mancini is where I got my SS springs. The big difference I found was that Mancini didn't have the hidden shipping charges that Summit had. I have never dealt with Jegs.

Jack
 
Blame Mopar,

They messed up the 318's in the early 90's and stop making 360's a few years later on.

I wouldnt call switching to Hyd roller cams and a much better head design messing it up. The 360 didnt die till 2002 either
 
-
Back
Top Bottom