Just a quick question

-
A

Abodies4ever

Member
Joined
Apr 18, 2015
Messages
12
Reaction score
0
Location
Lakeside
I am getting ready to tear my 360 down and prep it for a stroker kit. My question is this; are the crank and cams worth anything, or should I just recycle them? I would hate to scrap something that might put a little more cash in my " Dart Fund " by selling it to an individual
 
If they are still in useable condition, you can get a few bucks for them...
 
Well even as cores, you might have them re-ground.
 
Cams? If you tear it down and find more than one cam, take lots of pictures. Write Hot Rod magazine. It will be a first.
 
360 was highest production small block.
Do someone a solid and give it away.

But we'd love to see your stroker build! !!!!!!!



:burnout:
 
What cam is in there now?
A used cam is a hard sell IMO.
A core crank is a $50 item. (Considering it needs machining & bearings)
A Freshly done crank with bearings is the machine & parts cost plus 50 to a 100 bingos.

These parts do not bring much, in general. What about your current pistons? And con/ rods?
If you can sell it as an assembly, that would be a good thing for a builder for someone. Shipping would kill most though. Local sale at the swap meet would bring the best bucks.
Lay it all out on the table. You never know who wants what.

Good luck!
 
You must log in or register to reply here.
-

Back
Top