Moparman1806
Well-Known Member
Contact seller
The time comes that I have to move, and since my injuries, I can’t take the stuff with me. Up for sale in 1 lot- no exceptions are:
1- late 70’s 360 carb to pan(2 barrel)- mounting ear by starter broken off, but does have 68-72 a body 318 mounts
70’s 318 complete with a/c compressor, etc- ran when pulled, stored in garage since
73 340 block, mains- only had 72k when pulled, but got flooded in my basement years ago, so will need some sleeves, don’t bother asking for VIN, I crushed the car in the 90’s
Nice 318 bare block- was hot tanked and honed several years ago
1 nice forged poly crank
1 nice forged 318 crank
3- 340 cast cranks
1 400 crank
Set of 400 rods
Set of 340 rods(73)
Pair of poly heads- were done at machine shop, but have some rust now
318 heads
Big block motor home heads
340 windage tray
1970 small block 904 case
68-72 small block 727 - complete
I have another 727 outside that can go too- don’t quote me but I think 71 Challenger 383
A couple big block valve covers
75 440 police intake
360 4 barrel intake
All listed goes for $1500- will not separate
I do have an engine hoist that can be used for loading. I can not help loading due to severe back injuries
I do have much more stuff that I will probably sell off besides( distributors, engine parts, wheel covers, some body, etc.). That can be discussed when picking up other stuff, please don’t ask me to go searching beforehand.
Will also toss in a decent set of 68 valve covers, small block truck oil pan, passenger side big block truck ex manifold
Located in Tamaqua, Pa 18252
1- late 70’s 360 carb to pan(2 barrel)- mounting ear by starter broken off, but does have 68-72 a body 318 mounts
70’s 318 complete with a/c compressor, etc- ran when pulled, stored in garage since
73 340 block, mains- only had 72k when pulled, but got flooded in my basement years ago, so will need some sleeves, don’t bother asking for VIN, I crushed the car in the 90’s
Nice 318 bare block- was hot tanked and honed several years ago
1 nice forged poly crank
1 nice forged 318 crank
3- 340 cast cranks
1 400 crank
Set of 400 rods
Set of 340 rods(73)
Pair of poly heads- were done at machine shop, but have some rust now
318 heads
Big block motor home heads
340 windage tray
1970 small block 904 case
68-72 small block 727 - complete
I have another 727 outside that can go too- don’t quote me but I think 71 Challenger 383
A couple big block valve covers
75 440 police intake
360 4 barrel intake
All listed goes for $1500- will not separate
I do have an engine hoist that can be used for loading. I can not help loading due to severe back injuries
I do have much more stuff that I will probably sell off besides( distributors, engine parts, wheel covers, some body, etc.). That can be discussed when picking up other stuff, please don’t ask me to go searching beforehand.
Will also toss in a decent set of 68 valve covers, small block truck oil pan, passenger side big block truck ex manifold
Located in Tamaqua, Pa 18252
Last edited: