LBJ difference between 69 and 70 for Disc

[Dart6pak]

I would like to put a set of Kelsey Hayes discs on my 69 Dart--I bought a complete setup with LBJ from a 70 Duster---I have read some articles where they say that 69 used a different size than 70 ---I have also read where they instruct you to just redrill the size of the bolt hole on the existing LBJ from 10" drums.

Any input would be greatly appreciated

 

[crackedback]

If the disc spindles have the ball joint attached, you can bolt them right up. No drilling required.

Are you trying to use you drum ball joints on the disc spindles. There you will have an issue.

 

[Dart6pak]

I have the lower ball joints which came with the disc spindles(from a 70 Duster) Are they the same as was used on 69 Darts?

 

[doug 371]

ya they are the same...uppers are same also...nice car