Length of Wheel Studs

[1969VADart]

Does anyone know what the length of stock wheel studs is on a 69 Dart? For the life of me I can't seem to find that information even in my service manual. Is it safe to assume that longer studs will not be necessary just because I am installing Torque Thrust 2's on my car, or should I switch to a little longer? I am replacing all of the studs with new ones (to also get rid of the left hand turn also) anyway. Thanks.

 

[6pk2goDemon]

If your 69 Dart has disc brakes -- length is measured from the base of the shoulder to the tip/end of the stud.

Front stud is 1 31/32"

Rear stud is 1 1/2"

Good idea to replace the left hand studs :thumbup:

 

[1969VADart]

If your 69 Dart has disc brakes -- length is measured from the base of the shoulder to the tip/end of the stud.

Front stud is 1 31/32"

Rear stud is 1 1/2"

Good idea to replace the left hand studs :thumbup:

Car has factory drum brakes on all four corners. Does that mean all the studs will be the same length? And what would that be? Thanks.

 

[6pk2goDemon]

Since it's drum brakes.....

Front for 10" drums 1 7/16"

Front for 9" drums 1 1/4"

Rear is the same either way @ 1 1/2"