[SOLD] Master cyclinder gromet

[66samsmith]

help!

Need to find a rubber gromet for the push rod that centers the rob in the cyclinder. Apparently doesn't come with the cyclinder any more. 67 "A"
cyclinder

Any thoughts?

Thanks

 

[oldkimmer]

.............they sell them on ebay,,,..............kim......

 

[fishy68]

Grommet that centers the rod? Was that only on 67 and back cars? My 68 m/cyl. rod snapped into the m'cyl and you have to pull real hard to get it to pop back out. It has a dust boot on it but it's way to flimsy to hold the rod in place.

 

[72ScampTramp]

The one i bought for my 72 scamp had a small rubber ring that fit in a groove right on the end of the push rod as well as a dust boot

 

[Locomotion]

I've made the rubber rings that retain the pushrod in the master cylinder out of proper sized rubber vacuum hose. I suppise a particular sized O-ring may be an option as well.

 

[fishy68]

The one i bought for my 72 scamp had a small rubber ring that fit in a groove right on the end of the push rod as well as a dust boot

Ok. I know what your talking about. Never thought of that as a grommet since it's so small.

 

[formula_s]

The Ram Man sells them.