Thread Status:
Not open for further replies.
  1. hemidart67

    hemidart67 1967 dart pro-touring FABO Gold Member

    Messages:
    436
    Likes Received:
    107
    Joined:
    Aug 31, 2008
    Location:
    Brantford On
    Local Time:
    9:12 PM
    Contact Seller
    I have for sale a bunch of Master cylinder adapters I made.
    They are made from 6061-T6 aluminum.These have a bore of 1.725 to allow for the wilwood master cylinder and the "Chrysler style" plastic reservoir.These are 4.25" by 3.25". They are slightly bigger than the other guys so they cover the factory firewall hole.I can also get these Black Anodized if someone wants theirs black.
    These come with stainless mounting hardware for the master.I am selling these for $25
    I am located in Brantford,Ont.Canada

    DSC00473.jpg

    GetInline.jpg

    GetInline-1.jpg

    GetInline-2.jpg
     
    • Like Like x 13
    • Professor Fate

      Professor Fate Push the button, Max...

      Messages:
      746
      Likes Received:
      937
      Joined:
      Jan 13, 2020
      Location:
      Wisconsin
      Local Time:
      9:12 PM
      PM coming
       
    • 4spdragtop

      4spdragtop FABO Gold Member FABO Gold Member

      Messages:
      28,974
      Likes Received:
      9050
      Joined:
      Aug 28, 2009
      Location:
      Wasting time here
      Local Time:
      9:12 PM
      Nice piece Jay. Isnt there an offset adapter for big blocks?
       
      • Agree Agree x 2
      • /6 Matt

        /6 Matt 30 Degrees Crooked

        Messages:
        2,515
        Likes Received:
        210
        Joined:
        Jan 19, 2010
        Location:
        Lincolnton, NC
        Local Time:
        10:12 PM
        Any idea what shipping would be to the us? Also how far apart are the two studs for the mc?
         
      • YY1

        YY1 Well-Known Member

        Messages:
        6,711
        Likes Received:
        2519
        Joined:
        Oct 11, 2011
        Location:
        FL
        Local Time:
        10:12 PM
        Just a question-

        How are you keeping the bolts/studs on the back side from turning?
         
      • hemidart67

        hemidart67 1967 dart pro-touring FABO Gold Member

        Messages:
        436
        Likes Received:
        107
        Joined:
        Aug 31, 2008
        Location:
        Brantford On
        Local Time:
        9:12 PM
        Yes there is an offset adapter and I have never made any
         
      • hemidart67

        hemidart67 1967 dart pro-touring FABO Gold Member

        Messages:
        436
        Likes Received:
        107
        Joined:
        Aug 31, 2008
        Location:
        Brantford On
        Local Time:
        9:12 PM
        Shipping is $19.72 Canadian so with the exchange right now it's $14.98
        The mounting stud dimension is 3.218 on center @/6 Matt
         
        Last edited: Mar 5, 2020
      • hemidart67

        hemidart67 1967 dart pro-touring FABO Gold Member

        Messages:
        436
        Likes Received:
        107
        Joined:
        Aug 31, 2008
        Location:
        Brantford On
        Local Time:
        9:12 PM
        The stainless hardware is threaded in from the back side

        image.jpeg
         
        • Like Like x 1
        • Thanks! Thanks! x 1
        • oldkimmer

          oldkimmer FABO Gold Member FABO Gold Member

          Messages:
          15,333
          Likes Received:
          4228
          Joined:
          Nov 11, 2006
          Location:
          Kindersley, Saskatchewan,
          Local Time:
          9:12 PM
          Yup, like this. 1 for the 2 bolt master and 1 for the factory 4 bolt. Kim

          0E7B7BFB-8F23-42E8-8BFC-421B1864ABB2.jpeg

          638CB34B-BB71-4E15-9336-20B97F5ECCEA.jpeg
           
        • Silverwarrior

          Silverwarrior Well-Known Member

          Messages:
          70
          Likes Received:
          20
          Joined:
          Jul 22, 2016
          Location:
          Elk Run Heights, Ia
          Local Time:
          9:12 PM
          PM sent
           
        Thread Status:
        Not open for further replies.
        1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
          By continuing to use this site, you are consenting to our use of cookies.