Mono leafs

[HR5058]

What is everyone running for mono leafs. I have Calverts with 1” lift that have maybe 50 runs on them and 2000 miles and one is losing its arch already. I took all possible other variables out and still when i jacked up the rear the right side would come up quicker. On the grounds, bounced up and down multiply times and right side still higher. I took them off and measured and about a 1/4 off. Thoughts please. Thanks

 

[mopowers]

Have you called Calvert Racing? Maybe they can send you a couple new rear segments for cheap.

 

[HR5058]

Have you called Calvert Racing? Maybe they can send you a couple new rear segments for cheap.

Calling them first thing in the morning Monday. Worth a shot anyways.

 

[Killer6]

I could be wrong, but I believe the right side is stiffer intentionally, it may just becoming more obvious as they get some use.

 

[HR5058]

I could be wrong, but I believe the right side is stiffer intentionally, it may just becoming more obvious as they get some use.

I called before and both sides are equal. Same part number. I double checked to make sure there is no writing that said right or left anywhere.

 

[Killer6]

I called before and both sides are equal. Same part number. I double checked to make sure there is no writing that said right or left anywhere.

I guess with the Caltracs on, & set correctly, bias isn't necessary..

 

[Dart Frog]

I know people love their product but through my quick research I could not see where they advertise American steel. Consistency with offshore steel has always been a problem and I for one avoid it whenever possible.