MagnumBarracuda
Well-Known Member
I put a 1" spacer under my 750 mighty demon in my 67 Barracuda. I needed a new bracket to hold the cable. I got this All54225 which fits nice but now the Mopar throttle extension lever does not fit. The manufacturer website has nothing. I cannot find a stud that fits a 3/16 hole on the Holley carb lever(which is very close to the location of the old extension lever). I also cannot find a ferrule with a hole for the 1/2" stud (where the springs attach to the carb lever).Has anyone found a solution for this? I feel stupid, but when i searched for these things i could not find them. I could use a 1/4" stud or quick disconnect in the Holley carb lever but that will not give me even 3/4 of the travel I need for full throttle. It needs to be in the relative location of the old Mopar extension lever location. I have a universal throttle cable kit so i can make any length cable and put an end I want on it. A ferrule with a 1/2" ID hole would be ideal at this point.
