[SOLD] Mopar w2 heads

[Mgc340]

Brand new Mopar w2 heads. P4532693 open chamber heads. $1200 plus shipping and PayPal fees.

 

[moparfourever]

48 or 59 ?

 

[Mgc340]

48 or 59 ?

59’

 

[moparfourever]

do they oil through the head or pushrod ?

 

[Mgc340]

do they oil through the head or pushrod ?

Head

 

[moparfourever]

Do these require the T&D rocker arms and shafts or are they old school.

 

[Mgc340]

Do these require the T&D rocker arms and shafts or are they old school.

They are old school

 

[moparfourever]

Do you have the boxes they came in, or at least the part #, as P4532693 is a casting number.

 

[Mtrhead]

Econo

 

[moparfourever]

your eyes see different than mine.I see flat pedestals

 

[rumblefish360]

Econo

Pictured below

 

[moparfourever]

i see those as econ heads but i do not see the original post looking like that.Your computer must be zooming in better than mine

 

[abodyjoe]

your eyes see different than mine.I see flat pedestals

looks flat to me on my computer too

 

[rumblefish360]

The ones above are the latest design with dual header pattern and strengthening ribs unlike these Econo heads.

The heads up top can use Harland Sharp or the or Crane/MP rockers that have bolt down stands.

 

[moparfourever]

A part # would definitely identify them for sure

 

[rumblefish360]

It’s the same deal with W5 heads pictured below with Crane Gold rockers.

 

[Mgc340]

A part # would definitely identify them for sure

Sorry guys no part numbers. Non econo and I believe they are 65cc chambers

 

[rumblefish360]

Sorry guys no part numbers. Non econo and I believe they are 65cc chambers

65cc head below
Casting number 5249769

 

[rumblefish360]

This (set of) W2 heads I have were nearly the last set sold out of Summit. Notice the wide exhaust bolt only spacing. This W2 head style is the last type cast. Super minor differences are what only can be really seen. The differences besides 48*/59*, chamber cc’s and exhaust bolt spacing, would be in the ports, if you know what your looking for, I do not.

 

[moparfourever]

those are closed chamber 48 degree heads

 

[rumblefish360]

I hope this helps. The W2 cylinder head is an excellent cylinder head with only one major draw back of being iron.
Otherwise, a talented porter can have the head scream last 300 cfm.

 

[rumblefish360]

those are closed chamber 48 degree heads

P5249769, cast into the cylinder head as pictured above crossed reference into the last MP Catalog where you can read for yourself, 3rd line up from the bottom on the left you can see the numbers.

Thank you very much ladies and gentlemen, to the seller;

GLWS!!

To any potential buyer, this an excellent iron head.

 

[moparfourever]

Yes you are right,those are 59 degree (sorry) just to clear things up .Are those not considered closed chambers ?

 

[rumblefish360]

No worries, yes, closed chambered

 

[moparfourever]

thanks