Moparfest 2025

-

As long as this redneck hillbilly from Georgia can cross over into your country, we will be there helping out Serge at his vending location. Hopefully no threats of tornados and thunder storm down pours as we had in 2024. If you guys have any special request, let me know and we can work on bring those parts up with us.

The show in 2024 was a great weekend. Unfortunately, the threat of severe weather really hurt the turnout of both the show cars and vendors. Looking forward to the show as we already have made our plans on attending once again.
 
Great to hear! I had emailed Michelle and I can pull cuda into vendors spot. In around 730 and leave after 430, is fine with her. Fingers crossed for good weather! The drive home in Ram on Sunday last year was the worst rain I've ever driven in.
Look fwd to meeting you!
:thumbsup:
RPM440+6 said:
As long as this redneck hillbilly from Georgia can cross over into your country, we will be there helping out Serge at his vending location. Hopefully no threats of tornados and thunder storm down pours as we had in 2024. If you guys have any special request, let me know and we can work on bring those parts up with us.

The show in 2024 was a great weekend. Unfortunately, the threat of severe weather really hurt the turnout of both the show cars and vendors. Looking forward to the show as we already have made our plans on attending once again.
Click to expand...
 
For those who are up in the Granby area of Quebec, Serge Cote will be vending at this event from July 25th through the 27th. He has been prepping for this show and the Moparfest event over the past month.

If you guys who are coming to the Moparfest show have any special request for product to be delivered to the show, let me know. We can see if it is feasible and cost effective to bring the product to the event.

Serge has been building up his inventory over the past six months for the show, so he will have a variety of parts. You never know what to bring, so if we have a heads up, it makes things a bit easier.

Richard
 
Hope to see you there Richard. I may be vending as well trying to thin out everything.
Are you or Serge bringing the vertical "flocked" window plastic?
RPM440+6 said:
For those who are up in the Granby area of Quebec, Serge Cote will be vending at this event from July 25th through the 27th. He has been prepping for this show and the Moparfest event over the past month.

If you guys who are coming to the Moparfest show have any special request for product to be delivered to the show, let me know. We can see if it is feasible and cost effective to bring the product to the event.

Serge has been building up his inventory over the past six months for the show, so he will have a variety of parts. You never know what to bring, so if we have a heads up, it makes things a bit easier.

Richard
Click to expand...
 
@4spdragtop, I know that Serge picked up four pair of the mylar channel runs at Carlisle from me. Not sure on how many he might sell over the next three weeks, so it is best to just remind me to bring a set to New Hamburg if you should need them.
 
Was there last year great place .Was hoping to go this year but cant. Really hope il try to go am just starting a new project 71 Duster. Need a few part but hard to find a place in Ontario that sell trunk steel parts.
 
Anyone that is attending Moparfest with any special request for reproduction parts, let me know as Serge will be picking up a trailer load of parts from us next week in Columbus at the Mopar Nationals. There is the chance that we can get it to him within the time frame of the show the following week.
 
Hi Richard, sent you a pm.
RPM440+6 said:
Anyone that is attending Moparfest with any special request for reproduction parts, let me know as Serge will be picking up a trailer load of parts from us next week in Columbus at the Mopar Nationals. There is the chance that we can get it to him within the time frame of the show the following week.
Click to expand...
 
So my day at Moparfest was cut short. Had to visit First Aid due to Heat Exhaustion. To the guys parked beside me thank you so much for the help. The son of the owner of the purple car ran to get me help and while Cathy and I were at First Aid station they decided that one of them would drive my car home in case Cathy could not drive it.

IMG_3810.JPG


IMG_3811.JPG
 
Oh wow Doug! Not good! Glad they were quick thinking and got medical aid and helped with getting car home!
Lori shook her head when I told her I was bringing the Ridigid carpet drier/air mover and inverter. It definitely helped!
dcam57 said:
So my day at Moparfest was cut short. Had to visit First Aid due to Heat Exhaustion. To the guys parked beside me thank you so much for the help. The son of the owner of the purple car ran to get me help and while Cathy and I were at First Aid station they decided that one of them would drive my car home in case Cathy could not drive it.

View attachment 1716442969

View attachment 1716442970
Click to expand...

20250817_085135.jpg
 
I didn't make it today, the car started overheating almost immediately. I only made it about 20 miles from home and I had to stop twice on the way back to let it cool down and add water. Back to the drawing board.
 
You must log in or register to reply here.
-
Back
Top Bottom