Need a measurement, A-body K-frame to floor

-
69MOPE

69MOPE

Well-Known Member
Joined
Jul 12, 2011
Messages
1,731
Reaction score
119
Location
Ridley Park, Pa.
If you have an A-body 67-75 with 215/65/15 tires and your front end height set the factory specs (set using pivot to ball joint difference) , when you get time, can you give me your measurement from center of K-frame to floor. I am building a skid plate and to clear the Milodon pan. It needs to be 2 1/4" off the K-frame.
 
I run them low, not high...BUT, generally not that low, just lower than stock.
 
You must log in or register to reply here.
-

Back
Top