Need cam advise ( Hyd Roller )

-

SS Lancer

Well-Known Member
Joined
Mar 15, 2013
Messages
4,513
Reaction score
3,674
Location
North Carolina
I'm currently building a 505 RB with Victor Heads and Intake and wanted to run a large Hyd Roller Cam but have read that stock engine must have oil improvements performed to run a Hyd Roller is this a Fact please educate me .
 
Googled roller cams and found this in a mopar catalog: G. Tube and Peen Tool Package
Blocks off oil to right-side tappet bores. Required for race engines with high-lift
roller cams.
1 P4120603 Tube and Peen Tool Package (Small Block)
If you want to see entire catalog: [ame]http://www.mopar.com/assets/pdf/performance/catalog/Small_Block.pdf[/ame]
I believe this is used on solid rollers not hyd.
 
Googled roller cams and found this in a mopar catalog: G. Tube and Peen Tool Package
Blocks off oil to right-side tappet bores. Required for race engines with high-lift
roller cams.
1 P4120603 Tube and Peen Tool Package (Small Block)
If you want to see entire catalog: http://www.mopar.com/assets/pdf/performance/catalog/Small_Block.pdf
I believe this is used on solid rollers not hyd.

the kit you reference is for a small block...his 505 RB is a Big block...Dont think that kit is going to work very good..
 
-
Back
Top