I have a set of these but don't know where I got them or what they are off of! LOL
Need help id'ing these hubcaps
- Thread starter petty437
- Start date
-
I have a set of these but don't know where I got them or what they are off of! LOL
Dodge... that's all I got for you.
@Rainy Day Auto will tell you right quick like.
Alaskan_TA
Well-Known Member
Edit;
What Rani says, below.
What Rani says, below.
Last edited:
Look like from a late 60, 3/4 ton pickup.
Alaskan_TA
Well-Known Member
It is fairly common for truck & car lines to share the same type of hubcap.
Last edited:
My 100 year old Arkansas mother in law says that, love it
Princess Valiant
A.K.A. Rainy Day Auto
Negative Ghostrider
1965 and 66 dodge.
Those are the 10 inch caps so you need the older 65 and 66 type wheels with the 10 inch nubby circle on the wheel. 67 and up they went to the 8.75" center nubby circle. These caps are not very popular these days because the wheels that correspond are really hard to find.
These hub caps were common on base model coronets and polaras and some others but mostly bigger cars.
Jim 68cuda
Well-Known Member
Looks like 66-67 Dodge B & C body to me.
Alaskan_TA
Well-Known Member
Thanks Rani!
I'll edit the post above to reflect my mistake.
Every mistake made is a chance to learn, so at my age I am proud of my mistakes. ;-)
I'll edit the post above to reflect my mistake.
Every mistake made is a chance to learn, so at my age I am proud of my mistakes. ;-)
I told yall Littler Miss Badassary would be in here in a minute. LOL
duster2
Well-Known Member
The wheels for these caps are NOT hard to find , what size do you need ???
I have plenty of centers that can be made into wheels for these dogdish caps.
Also these can be used on cars and trucks......
Frank
I have plenty of centers that can be made into wheels for these dogdish caps.
Also these can be used on cars and trucks......
Frank
-
