Need help with Vent window frame.

-

Super-Cuda

MOPAR .. Move Over, Plymouth Approaching Rapidly!
Joined
Nov 5, 2014
Messages
3,932
Reaction score
5,260
Location
Canada
Questions for the 67-69 Barracuda experts...

1.Will a 1968 Barracuda Vent window frame fit in a 1967 Barracuda door?

2. Is the front chrome section of the Vent frame the same in all A body 2 door cars from 67-71?

Thanks for any help you can give me.
 
The 67' vent window is different from the 68'-69'. The difference is the attachment point at the corner where the division channel is. It's been a little while but I'm fairly sure the forward frame post is the same 67'-69' I would think a 68' would fit in the 67' door but not fasten properly at mid point of the division channel
 
Beyond the 67 only hardware/attach point detailed above... Not all 2 door cars are the same. No post hard top is one type. Post sedans are the other with or without the additional doors.
 
Beyond the 67 only hardware/attach point detailed above... Not all 2 door cars are the same. No post hard top is one type. Post sedans are the other with or without the additional doors.


Thanks very much for the reply guys.
 
-
Back
Top