I pulled the cam out of my 360 today and it is a Hughes or Engle brand HE 2430 AL Hughes doesn't list it on there web site anymore, I was hoping someone had an older catalog and could give me the specs.
Need info on a older hughes cam
- Thread starter SGBARRACUDA
- Start date
-
MOhorsePAR
Well-Known Member
The 2430 would indicate the duration. 224 intake / 230 exhaust @.050.
As for the lift, i would only be guessing.
Steve
As for the lift, i would only be guessing.
Steve
Yes that is what I figured, Engle list a 230 and a 240 but not a 230/240. I know they ground cams for Hughes. I measured lobe lift at .349 which would make it ,523 lift @ 1.5 ratio.
fishy68
Tyr Fryr's Inc.
Actually Hughes does have a list with all the older profiles. It's in the tech section. Here's a link that shows your cam about half way down the page.
http://www.hughesengines.com/general/techArticleDetail.asp?articleID=1000033
http://www.hughesengines.com/general/techArticleDetail.asp?articleID=1000033
Thanks for that info. Now what do you think about this cam for my combo?
-
