[FOR TRADE] new 451 Stroker BB for 4xx stroker SB So. Cal

-
Status
Not open for further replies.

pishta

I know I'm right....
Joined
Oct 13, 2004
Messages
23,815
Reaction score
13,670
Location
Tustin, CA
Rating - 100%
23   0   0
Contact seller
Yup, buddy wants to trade his 50 mile new 451 stroker B for a stroker LA. It has CNC ported 452 heads (by Power Heads, formerly of Brea, CA) 400 block, 400 rods, Crane Gold roller rockers, big Manton pushrods, Crane "Monster motor" cam/lifters custom ground for a 451, 440 cast crank (machinist said it was plenty strong) turned down and knife edged, KB 215 pistons. balanced. Pete Jackson dual idler gear drive, billet MP 2 piece distributor, Torker 2 intake. Has new 68 BB Barracuda Hedman headers on it but they are a little beat from installation. He is having serious installation issues and is fed up with it, wants a stroked small block. This motor ran in my 65 Barracuda (see my old post pics) and it ran hard, blew a muffler off a header hard. If there is any interest and you are in so. cal , PM me. Ill try and give you better specs if I can get them., Motor is in his 68 Barracuda now and has less than 50 miles on it (all in my car). He is looking for a stroked 340/360 LA or Magnum, no 5.7/6.1 as he dropped a valve seat twice in his 300C and swore off the Gen3 hemis. Has to be So.Cal and pick up or meet me somewhere. Guy lives in Orange County. probably would trade good auto trans too as it aint gonna fit an LA.
 
Pishta -I don't have stroker, but a new (77 I believe) 360, .60 over KB 191's, 587 heads with 2.02/ (larger exh), Edlbrock Performer, Mopar Electronic, CompCam Rollers, and Mopar Purple 527 mechanical cam. Has not been fired, sitting on my stand awaiting my Cuda AAR clone - Any interest, let me know, live in Northern Nevada
 
Status
Not open for further replies.
-
Back
Top