New block

-

greymouser7

Vagrant Vagabond “Veni Vidi Vici”
Joined
Apr 17, 2010
Messages
3,729
Reaction score
1,493
Location
78002 down the road from Atascosa, Texas
Dunno if this old news or not.

Incredible New Block Can Make Both A Hemi & A Wedge! - Hot Rod Network

Options & Specifications
rough-bored cast-iron block (4.240-inch bore) $3,800
Hemi or Wedge bolt pattern no charge
9.980- or 10.725-inch deck height no charge
rough bored to 4.490 inches $150
9.980-inch deck block with 2.750-inch main bore $125
enlarge cam tunnel for 60mm cam $250
cross-bolt #5 main cap $175
bush lifter bores $600

Muscle Motors2085 Glenn StreetLansing, Michigan 48906(888) 482-4900http://www.musclemotorsracing.com
 
Last edited:
Cheaper to just buy a crate engine by the time you buy the heads and everything else
 
Where are you going to find a mopar create engine when you can not find a block to start with I give mike credit for putting his money on the line for this big undertaking best of luck
 
While it is unlikely that I will ever buy one, the price seems reasonable for what it is.
 
What ever happened to the Indy Aluminum Max Blocks they had a low deck B Block and a high deck RB Block. I wonder what the weight of this new block is compared to the old stock blocks. Thanks Webby.
 
AFAIK, nothing happened with the Indy blocks, you can still get them. It's just having to deal with Indy, which a lot of people find to be a PITA. S/F....Ken M
 
-
Back
Top