Parts for Magnum head conversion

Car Parts For Sale Archive

Thread Status:
Not open for further replies.
  1. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    Contact Seller
    If you want to convert your 318 to a magnum head mill I've got rebuilt Magnum heads with the proper Mopar Performance springs, retainers and keepers, valves and seats ground, cleaned and inspected. I also have a Comp cam #20-222-3 262/270 duration.462/.470 lift or .492/.501 with the 1.6:1 Magnum rockers. I have the proper AMC lifters and Mopar pushrods for the Magnum head conversion.I also have the #P4876759 MP headbolt package I have a #7577 Edelbrock RPM Air Gap intake
    and a pair of Mopar performance black finned valve covers for Magnum.
    I'll have to dig up the reciepts and give you a price if you're interested. I would like to sell the whole thing but would intertain piecing it out. Pm me. toolmanmike PS everything is new except for the heads.
     
  2. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    Friday night bump!
     
  3. 72 slopar

    72 slopar Not so slo anymore!

    Messages:
    217
    Likes Received:
    2
    Joined:
    Jul 24, 2008
    Location:
    Valdosta, GA
    Local Time:
    1:37 PM
    I'm interested in price for valve covers, and intake. Thanks
     
  4. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    PM sent
     
  5. hemijoejr

    hemijoejr The Le Petomane Thruway

    Messages:
    349
    Likes Received:
    18
    Joined:
    Dec 24, 2009
    Location:
    NJ
    Local Time:
    2:37 PM
    PM Sent
     
  6. rumblefish360

    rumblefish360 So close, yet so far away FABO Gold Member

    Messages:
    37,390
    Likes Received:
    9105
    Joined:
    Jun 21, 2005
    Location:
    New York, on a Island
    Local Time:
    2:37 PM
    Why not just list the price?
     
  7. Stormy69

    Stormy69 Dusted

    Messages:
    206
    Likes Received:
    2
    Joined:
    Sep 5, 2009
    Location:
    Mtn Home AFB, Idaho
    Local Time:
    12:37 PM
    ^what he said...
    how much for;
    intake
    pushrods
    lifters
    cam
     
  8. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    Here's a list and prices. Everything is new except for the heads of course.
    These prices do not include freight. I can weigh the heads later today and
    get a close price to fed-ex them to your zip. Thanks, Mike

    Magnum V-8 heads cleaned, inspected,valves and seats ground
    I have the stock valve springs, retainers, keepers, rockers
    and stands although the performance pieces listed below
    have been installed.
    $300
    $150 P5249464 HD Magnum valve springs .525 lift (I think)
    $135 P4452032 HD Retainers for Magnum
    $ 20 P4529218 Valve locks
    $ 20 P5249661 Valve seals
    $ 50 P4876759 Head bolt package for steel and aluminum heads
    $100 CCA-20-222-3 Comp Cams hydraulic cam 262/270, .462/.470 or .492/.501 lift with Magnum rockers. 110 deg .
    $180 P4529220 lifters for Magnum conversion
    $ 50 P5007477 pushrod set for Magnum conversion
    $180 P5007617 Black finned Magnum valve covers
    $275 #7577 Edelbrock RPM Air Gap intake manifold
    ------
    $1460


    I tried to price these at or below Summit or Jegs prices. Those who have responded are already in line for those parts. I will be busy this weekend but I will respond when I can so please be patient. I want to be fair but if someone wants the whole lot I would like to sell it that way first as I mentioned in my original post. I would sell everything listed above for $1300 (+shipping) Thanks guys, Mike
     
  9. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    Here's a few photos of the heads and intake. The shot of the valve covers is from the Summit website. The covers are packed away upstairs in my garage.
    The heads have been cleaned in a solvent tank and visually inspected for cracks. The valves and seats were ground and the new parts installed. The gasket surfaces were cleaned with a 3m bristle disc to remove any old gaskket material. Mike

    011600_1754[00].jpg

    011600_1755[00].jpg

    011600_1755[01].jpg

    011600_1757[00].jpg

    011600_1757[01].jpg

    dcc-5007617.jpg
     
  10. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
  11. 64physhy

    64physhy Well-Known Member

    Messages:
    2,214
    Likes Received:
    35
    Joined:
    Dec 24, 2008
    Location:
    Weatherford, TX
    Local Time:
    1:37 PM
    Do you still have the P5007477 pushrod set for Magnum conversion? I have a set of rebuilt Magnum heads that I've about given up on selling, so I guess I might as well slap them on my 318.
     
  12. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    I do still have the pushrods although you also need the lifters so you can get oil to the heads through the pushrods. I have the lifters too. I have been talking to another FABO member about these parts so I'll let you know. Mike
     
  13. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    Any interest? I'd take $1200 for all the new parts and give you the heads free.
    You pay the freight. I need to sell. My 273 heads are off to the shop on Monday and I will need cash soon. Mike
     
  14. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    Barrett Jackson's Bump
     
  15. billytuffnuts

    billytuffnuts Well-Known Member

    Messages:
    480
    Likes Received:
    1
    Joined:
    Oct 8, 2009
    Location:
    Newport Beach, CA
    Local Time:
    11:37 AM
    let me know if you decide to sell those springs seperately
     
  16. toolmanmike

    toolmanmike FABO Staff Staff Member FABO Gold Member

    Messages:
    46,772
    Likes Received:
    31010
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    1:37 PM
    My last offer for the package......$1000 for all + shipping. A heck of a deal for all you get. I'm taking a $460 hit on the parts plus the cost of the heads and the cost of the valve job.
    As I stated before, I would like to sell all the parts as a package deal. Most of the parts don't work unless you have the rest of the pieces. PM me if interested. Mike
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.