PICTURES NEEDED PLEASE

-

KYE

Member
Joined
Nov 7, 2024
Messages
11
Reaction score
7
Location
CHILLIWACK
Looking for pictures for the placement of the starter solenoid, voltage regulator and the way the wiring is routed down the drivers side to the headlights. It is a 1966 barracuda. Unfortunately I didn't pull it apart so any help is appreciated.
 
Google Image Search.....
1748469997698.png
 
Starter solenoid is integrated with the starter. Voltage regulator is to the right of the master cylinder (as looking at it on the picture above).
 

Starter solenoid is integrated with the starter. Voltage regulator is to the right of the master cylinder (as looking at it on the picture above).
Yeah sorry meant starter relay looks just left of wire junctions.
 
All my disassembly photos are too big.....except one. Do you have the assembly manuals? Worth their weight in gold for the detail in routing and such.

IMG_4438.jpg
 
Your headlight harness goes up out of the bulkhead connecter, and routes over the voltage regulator, thru that loop, and then runs down to the side of the inner fender, then forward. It is held in the little trough with plastic straps as it runs behind the battery. From there, it may go thru a round plastic plug in the top of the inner fenderwell to the left headlight wit the rest of the harness going thru the radiator support and passing over to the passenger side headlight. That is the way my 65 harness goes, but your 66 may be slightly different. @66fs could tell you for sure!
 
-
Back
Top Bottom