skrews
Well-Known Member
Ported 308 SB heads
Flowed 270 / 205 as I recall.
Deck cut .110 to closed chamber 56cc
2.055 / 1.6 11/32 stem. Will likely need SB Chevy + .050 long valves for best geometry. Obviously shorter pushrods.
spring pockets cut .050
Manganese Bronze guides
Heads and intake will need milled to bolt together.
Tired of this science project collecting dust on the shelf.
$450 plus ride
PayPal preferred
PM me on board
Flowed 270 / 205 as I recall.
Deck cut .110 to closed chamber 56cc
2.055 / 1.6 11/32 stem. Will likely need SB Chevy + .050 long valves for best geometry. Obviously shorter pushrods.
spring pockets cut .050
Manganese Bronze guides
Heads and intake will need milled to bolt together.
Tired of this science project collecting dust on the shelf.
$450 plus ride
PayPal preferred
PM me on board
