Post your best engine pictures!

[turbo66valiant]

Hows this for a clean and uncluttered engine bay pic? He He

 

[6pakattack]

It will be a bit before mines ready for a Glamor shot !!!:sad5:

 

[firefighter1]

heres mine not as clean as some of the others though

 

[805moparkid]

heres mine not as clean as some of the others though

you should turn your carb 90* so the primaries are farthest away and make a fuel line up and over the valve cover so your fuel isn't boiling...

 

[wicked/six]

TF

 

[wayneswirld2]

Here's the slant in our '65 crew cab truck. The one that's currently in our'65 Valiant is bone stock and not much to look at....yet.

 

[firefighter1]

if i move my carb 90 degrees in order to move my fuel line, how do i setup my linkage fore the throttle and transmission? got pictures? thanks.

 

[powerwagonpaul]

here is mine. super six ,cold ram air, manifold heat with headers. had to modify the kickdown a bit to clear the headers.

 

[MJF]

You seem to have water heated intake? Did you make it yourself or is it some aftermarket? I have one from marine engine.

 

[powerwagonpaul]

made it myself:
http://www.forabodiesonly.com/mopar/showthread.php?t=119527&highlight=manifold+heat+socal

 

[805moparkid]

if i move my carb 90 degrees in order to move my fuel line, how do i setup my linkage fore the throttle and transmission? got pictures? thanks.

you make a new fuel line with the filter behind alternator (helps with hot starts)

as for your kickdown you can get the cable from lokar, same with your throttle if it is to short...

i run the stock throttle cable w/ custom bracket and have a manual VB so i dont run a kickdown

 

[/6 Matt]

wrong section... this is under slants... but nice! i have a 505RB for my AWB plymouth!

as for the slant

I saw 496 stroker and my jaw dropped as I thought "damn thats a big slant! whered he get that?!?"

 

[porksoda]

Bump

 

[porksoda]

Bump for more pictures!

Here is what I picked up! This was a $25 junkyard find.

This super6 set-up was in a Volare Wagon. A friend and I pulled it off like a few minutes before they were going to crush it. lol.

I was thinking of buying a carb rebuild kit and paint to freshen up the looks of the intake and exhaust.

 

[kt340sport]

hears mine

 

[kt340sport]

heres mine

 

[memike]

Thanks memike for posting the pics of my engine.Guzzi Mark

Thank you:blob: I am glad you did not mind me posting it :cheers: your slant is a great one for sure :cheers:

Mike,
You can buy the bracket from Jegs.
I have one on my car and it works good with some minor modifications.

I will be doing that when I put my new shaved big valve head on :happy1: Thank you for posting it, I save a few of these for reference :happy2:

 

[justcuz]

recent updated pic

 

[madmax/6]

Anouther 440.or 340 doesnt belong in this thread,,we can go to any car show and see multiple dozens of these .This is for SLANT /6 s.The only time I like looking at a V8 mopar is in my mirror with the owner scratching his head.Guzzi Mark

 

[zhandfull]

Some nice looking slant 6 engine bays some of you guys have.

 

[Johnny Dart]

Clearly some people have forgotten how to read.

 

[Arco440]

Ok here's mine ready to be installed.

 

[Johnny Dart]

Back to regularly scheduled programing.....

 

[Old Tired Rebel]

I just got Lucy last night and she is new to me. But here is her Heart.

 

[Bulldozer]

heres my mess... but soon to be........