[WANTED] Powe steering pump pulley 69 and earlier

[plumkrazee70]

I'm in need of a power steering pump pulley from a 69 and earlier. It is the key way style pulley. Unfortunately, mine is bent. It's the last in piece of the pulley puzzle I've been fighting.

Thanks!
Michael

 

[Dana67Dart]

Can you see the keyway from the front?

 

[plumkrazee70]

Can you see the keyway from the front?

Yes. I will post a picture of the shaft here shortly.

 

[Capt46]

Might have 1 can’t look till tomorrow

 

[plumkrazee70]

Might have 1 can’t look till tomorrow

Thank you! I got the pulleys you sent, worked perfectly!

 

[Capt46]

Bingo!! Do you still need the power steering pulley??

 

[cudamark]

Sometimes you can straighten out those pulleys. I've done quite a few in the past. A hydraulic press helps, but, sometimes a vice is enough.

 

[plumkrazee70]

Bingo!! Do you still need the power steering pulley??

Yes, cuz mine's bent. I think using a gear puller to pull it off jacked it up. I can press it back on by hand, but when I spin it, it is definitely wobbly.

 

[Capt46]

Mine might be solid? No holes ️ like yours I’ll measure in the am

 

[Oldmanmopar]

Mine might be solid? No holes ️ like yours I’ll measure in the am

Someone put those holes in there. 318 were solid and 340 were spoked

 

[plumkrazee70]

Mine might be solid? No holes ️ like yours I’ll measure in the am

That fine, as long as it lines up.

 

[plumkrazee70]

Someone put those holes in there. 318 were solid and 340 were spoked

Weird,.those holes made it so you can take the nuts off the bracket. I did think it was weird I couldn't find another like it while searching.

 

[Capt46]

This is what I have. Has a number 1890
On it

 

[plumkrazee70]

This is what I have. Has a number 1890
On it

View attachment 1716400947

View attachment 1716400948

View attachment 1716400949

Looks like it would work. Can you measure the diameter of the shaft hole and the overall diameter?

 

[Capt46]

Will do in the morning.